Official Paper

RRB JE CE 22 Apr 2025 Shift 2 CBT 2 Official Paper (Previous Year Paper)

150 questions · 120 minutes · with answers · free

Attempt as Timed Mock Test

General Abilities (50 questions)

1

What is the maximum number of Ministers allowed in the Council of Ministers, including the Prime Minister, as per the 91st Amendment Act? 

  1. ((a))

    20% of Lok Sabha strength 

  2. ((b))

    15% of Lok Sabha strength

  3. ((c))

    10% of Lok Sabha strength

  4. ((d))

    12% of Lok Sabha strength

Show Answer
Answer: ((a))

20% of Lok Sabha strength 

2

The glass panel used in greenhouses is known to retain ________.

  1. ((a))

    rainfall 

  2. ((b))

    pH

  3. ((c))

    humidity

  4. ((d))

    heat

Show Answer
Answer: ((a))

rainfall 

3

The Industrial Policy Resolution of 1956 categorised industries into how many groups? 

  1. ((a))

    Seven

  2. ((b))

     Three

  3. ((c))

    Five

  4. ((d))

    Nine

Show Answer
Answer: ((a))

Seven

4

If you want the primary recipient to see that others have received a copy of an email, you should enter their email addresses in the ______ field.

  1. ((a))

    Bcc

  2. ((b))

    Subject

  3. ((c))

    To

  4. ((d))

    Cc

Show Answer
Answer: ((a))

Bcc

5

The Millennium Development Goals (MDGs) aimed to reduce extreme poverty by which year? 

  1. ((a))

    2008

  2. ((b))

    2005

  3. ((c))

    2014

  4. ((d))

    2015

Show Answer
Answer: ((a))

2008

6

What is the primary purpose of using a firewall on a Personal Computer?

  1. ((a))

    To speed up internet connectivity

  2. ((b))

    To increase storage space

  3. ((c))

    To clean up temporary files

  4. ((d))

    To block unauthorised access and protect the computer

Show Answer
Answer: ((a))

To speed up internet connectivity

7

Inertia depends on which property of an object?

  1. ((a))

    Shape

  2. ((b))

    Mass

  3. ((c))

    Velocity

  4. ((d))

    Acceleration

Show Answer
Answer: ((a))

Shape

8

What is the first step to securing ones smartphone or tablet?

  1. ((a))

    Turning off mobile data

  2. ((b))

    Using only free Wi-Fi networks

  3. ((c))

    Installing more apps

  4. ((d))

    Setting a password/PIN-protected lock screen

Show Answer
Answer: ((a))

Turning off mobile data

9

Which official in the Gupta administration was responsible for peace and war matters?

  1. ((a))

    Vishayapati

  2. ((b))

    Mahapratihara

  3. ((c))

    Sandhi-Vigrahika

  4. ((d))

    Mahadandanayaka 

Show Answer
Answer: ((a))

Vishayapati

10

According to the Tendulkar methodology, what was the estimated percentage of people below the poverty line in rural areas in 2011-12?

  1. ((a))

    15.5%

  2. ((b))

    25.7%

  3. ((c))

    27.5%

  4. ((d))

    20%

Show Answer
Answer: ((a))

15.5%

11

What is India's global military ranking in the 2025 Global Firepower (GFP) index?

  1. ((a))

    2nd

  2. ((b))

    3rd

  3. ((c))

    4th

  4. ((d))

    5th

Show Answer
Answer: ((a))

2nd

12

Which of the following is NOT a source of release of smokestacks?

  1. ((a))

    Rivers 

  2. ((b))

    Thermal power plants

  3. ((c))

    Smelters

  4. ((d))

    Industries

Show Answer
Answer: ((a))

Rivers 

13

Which of the following is NOT toxic to non-target organisms in the soil?

  1. ((a))

     Herbicides

  2. ((b))

    Fungicides

  3. ((c))

    Organic fertilisers

  4. ((d))

    Pesticides

Show Answer
Answer: ((a))

 Herbicides

14

The practice of Jhum cultivation is prevalent in the __________.

  1. ((a))

    South east

  2. ((b))

    North west

  3. ((c))

    South west

  4. ((d))

    North east

Show Answer
Answer: ((a))

South east

15

Which of the following cities hosted the inaugural Kho Kho World Cup in January 2025?

  1. ((a))

    Mumbai 

  2. ((b))

    Kolkata

  3. ((c))

    Chennai

  4. ((d))

    New Delhi

Show Answer
Answer: ((a))

Mumbai 

16

The energy that is derived from the use of radioactive isotopes is termed as _________.

  1. ((a))

    solar energy

  2. ((b))

    geothermal energy

  3. ((c))

    thermal energy

  4. ((d))

    nuclear energy

Show Answer
Answer: ((a))

solar energy

17

Which of the following companies announced plans in February 2025 to construct the world's longest undersea cable, aiming to enhance internet connectivity across five continents, with landing points in India?

  1. ((a))

    Microsoft

  2. ((b))

    Amazon

  3. ((c))

    Google

  4. ((d))

    Meta

Show Answer
Answer: ((a))

Microsoft

18

In an electric circuit, what is the correct way to connect an ammeter?

  1. ((a))

    In parallel with the source 

  2. ((b))

    In series with the component

  3. ((c))

    In parallel with the component 

  4. ((d))

    In either series or parallel

Show Answer
Answer: ((a))

In parallel with the source 

19

What is the purpose of the Collation option in the Print settings? 

  1. ((a))

    To change the printer selection

  2. ((b))

    To adjust the page orientation

  3. ((c))

    To select a custom print range

  4. ((d))

    To print all the pages of a document as a set

Show Answer
Answer: ((a))

To change the printer selection

20

Why does a bee sting cause pain and irritation?

  1. ((a))

    The sting injects methanoic acid. 

  2. ((b))

    The sting injects a mild sugar solution

  3. ((c))

    The sting contains a strong base. 

  4. ((d))

    The sting releases carbon dioxide gas.

Show Answer
Answer: ((a))

The sting injects methanoic acid. 

21

What happens when an acid reacts with a metal oxide?

  1. ((a))

    Only salt is formed. 

  2. ((b))

    A salt and hydrogen gas are formed. 

  3. ((c))

    A salt and water are formed.

  4. ((d))

    Only water is formed.

Show Answer
Answer: ((a))

Only salt is formed. 

22

Which of the following is NOT a component of a CPU?

  1. ((a))

    Arithmetic Logic Unit (ALU)

  2. ((b))

    Control Unit (CU)

  3. ((c))

    Cache Memory 

  4. ((d))

    Hard Disk

Show Answer
Answer: ((a))

Arithmetic Logic Unit (ALU)

23

Which of the following states is NOT covered under the Atal Bhujal Yojana?

  1. ((a))

    Rajasthan

  2. ((b))

    Maharashtra 

  3. ((c))

    Jharkhand 

  4. ((d))

    Uttar Pradesh

Show Answer
Answer: ((a))

Rajasthan

24

The maximum sound is generated _________.

  1. ((a))

    from industrial smoke

  2. ((b))

    by the take off of a jet plane

  3. ((c))

    from vehicular emissions

  4. ((d))

    from house chimneys

Show Answer
Answer: ((a))

from industrial smoke

25

The main use of chlorofluorocarbons is in __________.

  1. ((a))

    refrigerants 

  2. ((b))

    smog

  3. ((c))

    chimneys

  4. ((d))

    vehicles

Show Answer
Answer: ((a))

refrigerants 

26

The Rudra Veena is predominantly associated with which genre of Hindustani music?

  1. ((a))

    Khayal

  2. ((b))

    Ghazal

  3. ((c))

    Dhrupad 

  4. ((d))

    Thumri

Show Answer
Answer: ((a))

Khayal

27

Which state of matter shows the highest expansion when temperature is increased?

  1. ((a))

    Solids

  2. ((b))

    Liquids 

  3. ((c))

    Plasma

  4. ((d))

    Gases

Show Answer
Answer: ((a))

Solids

28

What is the net force acting on an object if balanced forces are applied?

  1. ((a))

    Infinite

  2. ((b))

    Equal to the mass of the object

  3. ((c))

    Zero

  4. ((d))

    Equal to acceleration

Show Answer
Answer: ((a))

Infinite

29

What is the approximate pH of a neutral salt solution?

  1. ((a))

    Depends on the temperature

  2. ((b))

    Less than 7 

  3. ((c))

    More than 7

  4. ((d))

    Equal to 7

Show Answer
Answer: ((a))

Depends on the temperature

30

Which of the following correctly explains why clothes dry faster on a windy day?

  1. ((a))

    Wind decreases the temperature of the water molecules.

  2. ((b))

    Wind removes the water vapour from the clothes’ surroundings. 

  3. ((c))

    Wind reduces the surface area of the clothes

  4. ((d))

    Wind increases the humidity around the clothes.

Show Answer
Answer: ((a))

Wind decreases the temperature of the water molecules.

31

Which defect of vision occurs due to the weakening of ciliary muscles with age?

  1. ((a))

    Myopia 

  2. ((b))

    Hypermetropia

  3. ((c))

    Astigmatism

  4. ((d))

    Presbyopia

Show Answer
Answer: ((a))

Myopia 

32

Dr. BR Ambedkar described which part of the Indian Constitution as its ‘novel features', while Granville Austin referred to it as the ‘Conscience of the Constitution’?

  1. ((a))

    Fundamental Rights

  2. ((b))

    Preamble

  3. ((c))

    Fundamental Duties

  4. ((d))

    Directive Principles of State Policy

Show Answer
Answer: ((a))

Fundamental Rights

33

Which of the following is a characteristic difference between colloids and true solutions?

  1. ((a))

    True solutions exhibit Brownian motion, but colloids do not. 

  2. ((b))

    True solutions show the Tyndall effect, but colloids do not.

  3. ((c))

    True solutions have a single-phase system, whereas colloids have a two-phase system.

  4. ((d))

    True solutions have visible solute particles, whereas colloids have invisible dispersed particles

Show Answer
Answer: ((a))

True solutions exhibit Brownian motion, but colloids do not. 

34

 What does PCB stand for?

  1. ((a))

    Printed Circuit Board

  2. ((b))

    Primary Control Board

  3. ((c))

    Peripheral Connection Bus

  4. ((d))

    Processing Circuit Board

Show Answer
Answer: ((a))

Printed Circuit Board

35

What happens when a computer is put into Sleep mode? 

  1. ((a))

    It keeps the session active in RAM while using minimal power

  2. ((b))

    It shuts down completely.

  3. ((c))

    It stores data on the hard drive and powers off

  4. ((d))

    It restarts automatically after a few minutes. 

Show Answer
Answer: ((a))

It keeps the session active in RAM while using minimal power

36

The fine powder that is obtained from the modified and recycled form of plastic is called _______.

  1. ((a))

    polystyrene

  2. ((b))

    polyblend

  3. ((c))

    polythene

  4. ((d))

    polyethylene

Show Answer
Answer: ((a))

polystyrene

37

The phenomenon of multiple echoes due to repeated reflections is called ___________.

  1. ((a))

    resonance

  2. ((b))

    reverberation

  3. ((c))

    refraction

  4. ((d))

    diffraction

Show Answer
Answer: ((a))

resonance

38

Which of the following is the correct way to insert a new column in a spreadsheet?

  1. ((a))

    Go to File > New > Column.

  2. ((b))

    Go to Home > Insert > Insert Sheet Columns.

  3. ((c))

    Use Ctrl + Z to insert a column. 

  4. ((d))

    Press Ctrl + X and then Insert. 

Show Answer
Answer: ((a))

Go to File > New > Column.

39

Which of the following correctly represents the chemical formula of a compound formed by aluminium and sulphate ions?

  1. ((a))

    Al(SO4)3

  2. ((b))

    Al2SO4

  3. ((c))

    Al2(SO4)3

  4. ((d))

    Al3(SO4)2

Show Answer
Answer: ((a))

Al(SO4)3

40

In which of the following regions the Himalayas has the greatest width?

  1. ((a))

    Arunachal Pradesh

  2. ((b))

    Kashmir 

  3. ((c))

    Himachal Pradesh

  4. ((d))

    Sikkim

Show Answer
Answer: ((a))

Arunachal Pradesh

41

What is the shortcut key to start a slideshow from the beginning? 

  1. ((a))

    F5

  2. ((b))

    Alt + Tab

  3. ((c))

    Ctrl + P

  4. ((d))

    Shift + F5 

Show Answer
Answer: ((a))

F5

42

Which of the following CANNOT be considered as a measure to control global warming?

  1. ((a))

    Causing deforestation

  2. ((b))

    Cutting down use of fossil fuel

  3. ((c))

    Efficiently using energy

  4. ((d))

    Reduction in emission of greenhouse gases

Show Answer
Answer: ((a))

Causing deforestation

43

Which Article provides Ministers the right to participate in parliamentary proceedings but without voting rights?

  1. ((a))

    Article 53

  2. ((b))

    Article 77 

  3. ((c))

    Article 88

  4. ((d))

    Article 78

Show Answer
Answer: ((a))

Article 53

44

Identify the correct formula for the compound formed between Mg2+ and PO43- ions.

  1. ((a))

    MgPO4

  2. ((b))

    Mg3(PO4)3

  3. ((c))

    Mg3(PO4)2

  4. ((d))

    Mg(PO4)3

Show Answer
Answer: ((a))

MgPO4

45

What was the main objective of the Extremists during the Indian National Movement?

  1. ((a))

    To attain complete independence (Swaraj)

  2. ((b))

    To bring social reforms

  3. ((c))

    To promote British goods in India

  4. ((d))

    To expand the legislative councils

Show Answer
Answer: ((a))

To attain complete independence (Swaraj)

46

Who among the following inaugurated the 38th National Games held in Dehradun in January 2025?

  1. ((a))

    Pushkar Singh Dhami 

  2. ((b))

    Anurag Thakur

  3. ((c))

    Droupadi Murmu

  4. ((d))

    Narendra Modi 

Show Answer
Answer: ((a))

Pushkar Singh Dhami 

47

What is the primary function of the F4 key in MS Excel when editing a cell reference in a formula?

  1. ((a))

    Repeats the last action

  2. ((b))

    Opens the Find and Replace dialog

  3. ((c))

    Refreshes the worksheet

  4. ((d))

    Toggles between absolute and relative references

Show Answer
Answer: ((a))

Repeats the last action

48

If an object is dropped from rest, what will be its velocity after 15 seconds? (g = 9.8 m/s2)

  1. ((a))

    149 m/s

  2. ((b))

    147 m/s

  3. ((c))

    145 m/s 

  4. ((d))

    143 m/s

Show Answer
Answer: ((a))

149 m/s

49

If the absolute refractive index of a medium is less than 1, it means ________.

  1. ((a))

    the medium absorbs all light

  2. ((b))

    the medium is a perfect reflector

  3. ((c))

    light travels faster in that medium than in vacuum

  4. ((d))

    light travels slower in that medium than in vacuum

Show Answer
Answer: ((a))

the medium absorbs all light

50

The primary agent that helps in the decomposition of biodegradable matter in domestic sewage is __________.

  1. ((a))

    bacterium

  2. ((b))

    nitrate

  3. ((c))

    phosphate

  4. ((d))

    chloride

Show Answer
Answer: ((a))

bacterium

Technical Abilities (100 questions)

51

Which type of footing is preferred for closely spaced columns in a row?

  1. ((a))

    Continuous footing

  2. ((b))

    Combined footing

  3. ((c))

    Strap footing

  4. ((d))

    Isolated footing

Show Answer
Answer: ((a))

Continuous footing

52

Which of the following sensors on board of the Indian Remote Sensing satellites is capable of monitoring dynamic phenomenon such as forest fire?

  1. ((a))

    PAN

  2. ((b))

    LISS I

  3. ((c))

    WiFS

  4. ((d))

    MOS

Show Answer
Answer: ((a))

PAN

53

Which of the following statements about traffic marking classification is INCORRECT?

  1. ((a))

    Longitudinal markings regulate lane discipline and provide guidance to drivers. 

  2. ((b))

    Transverse markings include stop lines, pedestrian crossings and yield lines.

  3. ((c))

    Yellow markings are exclusively used for regulatory purposes, while white markings are only used for guidance.

  4. ((d))

    Object markings are used to indicate fixed roadside obstacles like medians and bridge piers. 

Show Answer
Answer: ((a))

Longitudinal markings regulate lane discipline and provide guidance to drivers. 

54

Which type of footing is most commonly used when a column is placed near a property boundary, restricting footing extension on one side?

  1. ((a))

    Strap footing

  2. ((b))

    Isolated footing 

  3. ((c))

    Combined footing

  4. ((d))

    Mat footing

Show Answer
Answer: ((a))

Strap footing

55

A Location Plan is also called a:

  1. ((a))

    Key Plan

  2. ((b))

    Survey Plan

  3. ((c))

    Site Plan

  4. ((d))

    Master Plan 

Show Answer
Answer: ((a))

Key Plan

56

The term 'eccentric footing' refers to a footing: 

  1. ((a))

    placed off-centre relative to the column 

  2. ((b))

    shared by multiple columns 

  3. ((c))

    used for machine foundations

  4. ((d))

    having a circular shape

Show Answer
Answer: ((a))

placed off-centre relative to the column 

57

Which of the following boundary conditions for a column results in the lowest effective length factor (K)?

  1. ((a))

    Both ends fixed

  2. ((b))

    One end fixed and the other free

  3. ((c))

    One end fixed and the other pinned

  4. ((d))

    Both ends pinned

Show Answer
Answer: ((a))

Both ends fixed

58

According to the Bureau of Indian Standards, IS 12894:2002, clay and silt in sand for pulverized fuel-ash lime bricks should preferably be:

  1. ((a))

    11-15%

  2. ((b))

    16-20%

  3. ((c))

    6-10%

  4. ((d))

    0-5%

Show Answer
Answer: ((a))

11-15%

59

Which of the following is NOT a desirable characteristic of a good formwork?

  1. ((a))

    Should provide a smooth surface finish

  2. ((b))

    Should be easily handled and removed 

  3. ((c))

    Should be rigid and strong 

  4. ((d))

    Should be highly absorbent to absorb excess water

Show Answer
Answer: ((a))

Should provide a smooth surface finish

60

Which type of window sill is best suited for areas prone to heavy rainfall?

  1. ((a))

    Sloped sill

  2. ((b))

    Vertical sill

  3. ((c))

    Horizontal sill 

  4. ((d))

    Flat sill 

Show Answer
Answer: ((a))

Sloped sill

61

A finish of rich concrete made with very hard and tough quality coarse aggregate such as granite, basalt, quartzite, etc. is known as _____ finish.

  1. ((a))

    ceramic

  2. ((b))

    terrazzo

  3. ((c))

    monolithic

  4. ((d))

    granolithic

Show Answer
Answer: ((a))

ceramic

62

In a reinforced concrete beam, what should the spacing of vertical stirrups be in terms of effective depth, to ensure adequate shear reinforcement as per IS 456:2000? 

  1. ((a))

    It should not exceed 0.75 times the effective depth (d) of the beam. 

  2. ((b))

    It should not exceed twice the effective depth (d) of the beam.

  3. ((c))

    It should not exceed the effective depth (d) of the beam. 

  4. ((d))

    It should not exceed 1.5 times the effective depth (d) of the beam.

Show Answer
Answer: ((a))

It should not exceed 0.75 times the effective depth (d) of the beam. 

63

A building section drawing does NOT give which of the following information? 

  1. ((a))

    Height of the structure

  2. ((b))

    Foundation used for the structure

  3. ((c))

    Length and width of the rooms

  4. ((d))

    Type of materials used for the structure

Show Answer
Answer: ((a))

Height of the structure

64

Which keyboard shortcut is used to toggle wireframe mode in 3ds Max? 

  1. ((a))

    F3

  2. ((b))

    Ctrl + W

  3. ((c))

    W

  4. ((d))

    Shift + X

Show Answer
Answer: ((a))

F3

65

In the three envelope system of tender submission, the first envelope contains: 

  1. ((a))

    technical bid

  2. ((b))

    documents related to eligibility criteria

  3. ((c))

    financial bid

  4. ((d))

    documents related to estimation of construction work

Show Answer
Answer: ((a))

technical bid

66

For a column with one end fixed and the other end hinged, what is the effective length factor K?

  1. ((a))

    0.5

  2. ((b))

    1.0

  3. ((c))

    2.0

  4. ((d))

    0.7

Show Answer
Answer: ((a))

0.5

67

Which of the following components of the Autodesk Civil 3D 2024 user interface provides access to file-related commands such as creating, opening, printing, exporting and publishing files?

  1. ((a))

    Command Line

  2. ((b))

    Toolspace Window

  3. ((c))

    Application Menu

  4. ((d))

    Ribbon

Show Answer
Answer: ((a))

Command Line

68

If the width of a rectangular notch is doubled, then the discharge will _______.

  1. ((a))

    double

  2. ((b))

    become half

  3. ((c))

    remain the same

  4. ((d))

    increase by three times

Show Answer
Answer: ((a))

double

69

Expanded polystyrene (EPS) is commonly used in the construction of:

  1. ((a))

    reinforced concrete

  2. ((b))

    structural steel 

  3. ((c))

    thermal insulation panels

  4. ((d))

    electrical wiring

Show Answer
Answer: ((a))

reinforced concrete

70

Which of the following is a major combustible component of biogas?

  1. ((a))

    Carbon dioxide 

  2. ((b))

    Hydrogen sulphide 

  3. ((c))

    Methane 

  4. ((d))

    Butane

Show Answer
Answer: ((a))

Carbon dioxide 

71

A light pole is held in place by three tensioned cables forming angles of 60°, 75°, and 45° with each other at a common point. Assuming equilibrium, which theorem helps to determine the tensions in the cables?

  1. ((a))

    Varignon’s theorem

  2. ((b))

    Parallel axis theorem

  3. ((c))

    Lami’s theorem

  4. ((d))

    Newton’s second law

Show Answer
Answer: ((a))

Varignon’s theorem

72

What are beams fabricated using rolled plates called?

  1. ((a))

    Plate girders

  2. ((b))

    Castellated beams

  3. ((c))

    Hybrid beams

  4. ((d))

    Composite beams

Show Answer
Answer: ((a))

Plate girders

73

Why is proper drainage essential for subgrade soil in highway pavements?

  1. ((a))

    To prevent moisture retention and strength reduction

  2. ((b))

    To reduce erosion

  3. ((c))

    To increase soil temperature

  4. ((d))

    To allow easy mixing with cement 

Show Answer
Answer: ((a))

To prevent moisture retention and strength reduction

74

Which of the following statements is true regarding a fixed beam?

  1. ((a))

    The deflection and slope at the fixed end are zero.

  2. ((b))

    A fixed beam is always supported on more than two supports.

  3. ((c))

    A fixed beam does not experience end moments

  4. ((d))

    The deflection at the fixed ends is zero, but the slope is not zero.

Show Answer
Answer: ((a))

The deflection and slope at the fixed end are zero.

75

Which of the following is NOT a type of drilling equipment? 

  1. ((a))

    Truck mounted drill

  2. ((b))

    Jack hammer 

  3. ((c))

    Drifters

  4. ((d))

    Excavator

Show Answer
Answer: ((a))

Truck mounted drill

76

Which method is most commonly used for placing concrete in high-rise buildings?

  1. ((a))

    Direct placement using wheelbarrows 

  2. ((b))

    Hand mixing and placing

  3. ((c))

    Pouring concrete from a height without any control

  4. ((d))

    Pumping method 

Show Answer
Answer: ((a))

Direct placement using wheelbarrows 

77

Which of the following statements about manometric head is correct?

  1. ((a))

    It is the effective head that accounts for losses.

  2. ((b))

    It represents only the suction head of a pump. 

  3. ((c))

    It does not include friction losses.

  4. ((d))

    It is a constant value for all pumps.

Show Answer
Answer: ((a))

It is the effective head that accounts for losses.

78

The correct relationship between Modulus of Elasticity (E) and Shear Modulus (G) is given by:

  1. ((a))

    E = 3G(1−2μ) 

  2. ((b))

    E = G(1+μ)

  3. ((c))

    E = G(1+2μ)

  4. ((d))

    E = 2G(1+μ) 

Show Answer
Answer: ((a))

E = 3G(1−2μ) 

79

What is the main purpose of applying grade compensation on a horizontal curve?

  1. ((a))

    To increase the tractive effort of vehicles

  2. ((b))

    To make the road surface smoother 

  3. ((c))

    To reduce the frictional resistance due to the curve and gradient

  4. ((d))

    To allow vehicles to travel at higher speeds on curves

Show Answer
Answer: ((a))

To increase the tractive effort of vehicles

80

With respect to Darcy's law, which of the following heads are ignored for soil flow problems?

  1. ((a))

    Hydraulic head

  2. ((b))

    Datum head 

  3. ((c))

    Velocity head

  4. ((d))

    Pressure head 

Show Answer
Answer: ((a))

Hydraulic head

81

Which of the following bonds is considered the strongest and most suitable for loadbearing walls?

  1. ((a))

    Stretcher bond 

  2. ((b))

    English bond

  3. ((c))

    Flemish bond 

  4. ((d))

    Header bond 

Show Answer
Answer: ((a))

Stretcher bond 

82

If the length, width and height of the wall is 7 m, 0.3 m, 3 m, respectively, then the total quantity of brickwork required will be:

  1. ((a))

    21 m2

  2. ((b))

    6.3 m3

  3. ((c))

    0.9 m2

  4. ((d))

    12.6 m3

Show Answer
Answer: ((a))

21 m2

83

What is the main purpose of adding steel fibres to concrete?

  1. ((a))

    To reduce the need for cement

  2. ((b))

    To increase the water cement ratio

  3. ((c))

    To increase the weight of concrete

  4. ((d))

    To improve its tensile strength and crack resistance

Show Answer
Answer: ((a))

To reduce the need for cement

84

According to Terzaghi's bearing capacity theory, the angle of shear failure planes of the Rankines passive zones of linear shear, with the horizontal is _____________. (where φ = angle of internal friction)

  1. ((a))

    45 − φ/2

  2. ((b))

    45

  3. ((c))

    45 + φ/2

  4. ((d))

    φ/2

Show Answer
Answer: ((a))

45 − φ/2

85

Which of the following causes settlement of foundations due to water level fluctuation?

  1. ((a))

    Vibration due to blasting

  2. ((b))

    Seasonal swelling and shrinking of expansive soils

  3. ((c))

    Adjacent excavation

  4. ((d))

    Slipping of ground strata on sloping sites

Show Answer
Answer: ((a))

Vibration due to blasting

86

The vertical downward movement of a structure's base is known as _____. 

  1. ((a))

    Deformation

  2. ((b))

    Deflection 

  3. ((c))

    Depression

  4. ((d))

    Settlement

Show Answer
Answer: ((a))

Deformation

87

Which of the following represents an engineer's scale?

  1. ((a))

    1 in 10

  2. ((b))

    1/5000

  3. ((c))

    1 cm = 10 m

  4. ((d))

    2%

Show Answer
Answer: ((a))

1 in 10

88

The devices for harnessing solar energy are usually coated with:

  1. ((a))

    anti-reflective coating 

  2. ((b))

    anti-glare coating

  3. ((c))

    carbide coating

  4. ((d))

    titanium oxide coating

Show Answer
Answer: ((a))

anti-reflective coating 

89

Pointing is a process carried out in: 

  1. ((a))

    stucco walls

  2. ((b))

    plastered masonry walls

  3. ((c))

    exposed masonry walls

  4. ((d))

    wattle and daub walls

Show Answer
Answer: ((a))

stucco walls

90

Escalator balustrades are primarily designed to: 

  1. ((a))

    protect users from falling

  2. ((b))

    support the weight of steps

  3. ((c))

    improve aesthetics 

  4. ((d))

    house control panels

Show Answer
Answer: ((a))

protect users from falling

91

The aggregate crushing value in accordance with IS 2386 Part IV, 1963, shall not exceed _____ for concrete for wearing surfaces such as runways, roads and pavements.

  1. ((a))

    35%

  2. ((b))

    45%

  3. ((c))

    30%

  4. ((d))

    50%

Show Answer
Answer: ((a))

35%

92

As per general conditions of the contract, the security money deposited by the contractor is: 

  1. ((a))

    20% of the estimated cost

  2. ((b))

    10% of the estimated cost

  3. ((c))

    2% of the estimated cost

  4. ((d))

    5% of the estimated cost

Show Answer
Answer: ((a))

20% of the estimated cost

93

Where is the centre of gravity of a solid cone located?

  1. ((a))

    At a height h2\frac{h}{2} from the base along the axis

  2. ((b))

    At the geometric centre of the base

  3. ((c))

    At a height h4\frac{h}{4} from the base along the axis

  4. ((d))

    At the apex of the cone

Show Answer
Answer: ((a))

At a height h2\frac{h}{2} from the base along the axis

94

In polymer-modified concrete (PMC), the role of the polymer component is to: 

  1. ((a))

    increase setting time significantly

  2. ((b))

    reduce water permeability and increase flexibility

  3. ((c))

    reduce strength and durability

  4. ((d))

    increase brittleness

Show Answer
Answer: ((a))

increase setting time significantly

95

What is the function of the 'Layer Manager' in Autodesk 3ds Max?

  1. ((a))

    To control object visibility and manage scene organisation

  2. ((b))

    To assign materials to object

  3. ((c))

    To group objects together

  4. ((d))

    To add cameras to the scene

Show Answer
Answer: ((a))

To control object visibility and manage scene organisation

96

Select the pair in which the words present the same relationship to each other as the words of the given pair.

Approximate quantity estimate : Running meter length : : Cube rate estimate : ____________

  1. ((a))

    plinth area

  2. ((b))

    cubical content

  3. ((c))

    cost of one room

  4. ((d))

    area content 

Show Answer
Answer: ((a))

plinth area

97

Which structural component of a bridge directly supports the superstructure and transfers the load to the foundation? 

  1. ((a))

    Deck

  2. ((b))

    Expansion Joints

  3. ((c))

    Bearings

  4. ((d))

    Piers

Show Answer
Answer: ((a))

Deck

98

Which type of stone masonry uses stones of uniform size and shape?

  1. ((a))

    Dry masonry

  2. ((b))

    Ashlar masonry

  3. ((c))

    Random rubble

  4. ((d))

    Coursed rubble 

Show Answer
Answer: ((a))

Dry masonry

99

The whole circle bearing and the reduced bearing of a line will be the same when the line is in the ________ quadrant.

  1. ((a))

    north-west

  2. ((b))

    north-east

  3. ((c))

    south-east

  4. ((d))

    south-west

Show Answer
Answer: ((a))

north-west

100

In plastering of surfaces, the process of hacking is done to ensure:

  1. ((a))

    that the surface is smooth and free from all laitance

  2. ((b))

     bonding between the surface and the plaster

  3. ((c))

    that the materials of plaster are mixed to a correct consistency

  4. ((d))

    that the moisture content is retained in the plaster mix

Show Answer
Answer: ((a))

that the surface is smooth and free from all laitance

101

A point on the picture plane where all the parallel lines appear to converge is called:

  1. ((a))

    station point 

  2. ((b))

    vanishing point 

  3. ((c))

    eye level point 

  4. ((d))

    angle of vision point 

Show Answer
Answer: ((a))

station point 

102

The moment of force depends on which factors?

  1. ((a))

    The speed of rotation

  2. ((b))

    Only the distance from the point of rotation

  3. ((c))

    Both force magnitude and perpendicular distance

  4. ((d))

    Only the magnitude of the force

Show Answer
Answer: ((a))

The speed of rotation

103

Which of the following factors would most likely decrease surface runoff?

  1. ((a))

    Removal of vegetation

  2. ((b))

    High intensity rainfall

  3. ((c))

    Impervious surfaces like roads and buildings

  4. ((d))

    Permeable soil and vegetation cover 

Show Answer
Answer: ((a))

Removal of vegetation

104

Cracks in buildings caused by vegetation are because of:

  1. ((a))

    moisture due to transpiration of vegetation

  2. ((b))

    the removal of vegetation leading to dry conditions 

  3. ((c))

    dense branches of trees adjacent to the building

  4. ((d))

    the roots of trees very close to the building

Show Answer
Answer: ((a))

moisture due to transpiration of vegetation

105

What is the main advantage of a raft foundation?

  1. ((a))

    Reduces column spacing

  2. ((b))

     Settlement is uniform

  3. ((c))

    Easier to construct

  4. ((d))

    Cheaper than other foundations

Show Answer
Answer: ((a))

Reduces column spacing

106

Which of the following will NOT prevent cracks resulting from sulphate attack?

  1. ((a))

    Use of bricks containing high percentage of soluble salts

  2. ((b))

    Use of sulphate resistant cement in building works

  3. ((c))

    Use of rich cement mortar or concrete in building works

  4. ((d))

    Provision of damp proofing to maintain dry conditions

Show Answer
Answer: ((a))

Use of bricks containing high percentage of soluble salts

107

Borosilicate glass is used in the manufacture of laboratory equipment and cooking utensils due to what property?

  1. ((a))

    It can withstand high temperatures. 

  2. ((b))

    It can be moulded into curved shapes

  3. ((c))

    It is a clear glass and does not obscure vision.

  4. ((d))

    It is a strong glass and resists breakage.

Show Answer
Answer: ((a))

It can withstand high temperatures. 

108

The foundation settlement caused by lowering of water level in fine grained soils is _______. 

  1. ((a))

    consolidation

  2. ((b))

    elastic compression

  3. ((c))

    erosion

  4. ((d))

    plastic compression

Show Answer
Answer: ((a))

consolidation

109

For a thin rod of length L, rotating about its center, the radius of gyration is:

  1. ((a))

    L

  2. ((b))

    L12\rm \frac{L}{\sqrt 12}

  3. ((c))

    L3\rm \frac{L}{\sqrt 3}

  4. ((d))

    L2\rm \frac{L}{\sqrt 2}

Show Answer
Answer: ((a))

L

110

In the moment distribution method, how is the distribution factor (DF) for a structural member at a joint determined?

  1. ((a))

    By multiplying the stiffness of the considered member at a joint with the total stiffness of all the members meeting at that joint

  2. ((b))

    By dividing the total stiffness of all the members meeting at a joint by the stiffness of the considered member

  3. ((c))

    By adding the stiffness of the considered member at a joint by the total stiffness of all the members meeting at that joint

  4. ((d))

    By dividing the stiffness of the considered member at a joint by the total stiffness of all the members meeting at that joint

Show Answer
Answer: ((a))

By multiplying the stiffness of the considered member at a joint with the total stiffness of all the members meeting at that joint

111

Soil is composed of three layers of height 'h' m each. The permeability of layers are k, 2k, and k respectively. The equivalent permeability in vertical direction is: 

  1. ((a))

    6k/5

  2. ((b))

    5/2k

  3. ((c))

    2k/5

  4. ((d))

    4k

Show Answer
Answer: ((a))

6k/5

112

What is the typical ratio of cement, sand and aggregate for RCC (M20 grade)?

  1. ((a))

    1 : 4 : 8

  2. ((b))

    1 : 2 : 3

  3. ((c))

    1 : 3 : 6

  4. ((d))

    1 : 1.5 : 3 

Show Answer
Answer: ((a))

1 : 4 : 8

113

In a reciprocating pump, which of the following options connects the piston to the crankshaft?

  1. ((a))

    Bearings

  2. ((b))

    Suction pipe

  3. ((c))

    Delivery pipe

  4. ((d))

    Connecting rod

Show Answer
Answer: ((a))

Bearings

114

Which type of reinforcement is called the main reinforcement in a one-way slab?

  1. ((a))

    Top reinforcement supported along the longer span

  2. ((b))

    Top reinforcement provided in the transverse direction

  3. ((c))

    Bottom reinforcement placed in the longer span direction

  4. ((d))

    Bottom reinforcement provided in the shorter span direction

Show Answer
Answer: ((a))

Top reinforcement supported along the longer span

115

Which type of scaffolding is used for painting tall buildings?

  1. ((a))

    Suspended scaffolding

  2. ((b))

    Cantilever scaffolding

  3. ((c))

    Double scaffolding

  4. ((d))

    Single scaffolding 

Show Answer
Answer: ((a))

Suspended scaffolding

116

Which tool is used for breaking hard surfaces during excavation?

  1. ((a))

    Pickaxe

  2. ((b))

    Crowbar

  3. ((c))

    Rake

  4. ((d))

    Spade

Show Answer
Answer: ((a))

Pickaxe

117

What is the role of impact force in the soil compaction process?

  1. ((a))

    It increases soil permeability

  2. ((b))

    It reduces the void spaces by sudden compression. 

  3. ((c))

    It creates a uniform soil texture. 

  4. ((d))

    It helps to retain moisture. 

Show Answer
Answer: ((a))

It increases soil permeability

118

The raw material for slate tile roofing is ______.

  1. ((a))

    straw

  2. ((b))

    metal

  3. ((c))

    mud

  4. ((d))

    stone

Show Answer
Answer: ((a))

straw

119

Which of the following is NOT true with respect to structural cracks?

  1. ((a))

    Pose significant risk to the stability of the building. 

  2. ((b))

    Generally the damage is difficult to rectify or repair.

  3. ((c))

    Caused by changes in moisture, etc. on building materials. 

  4. ((d))

    Caused by overloading of the structural components.

Show Answer
Answer: ((a))

Pose significant risk to the stability of the building. 

120

Which of the following is the full form of PENT or PETN, an explosive used in tunneling and military applications?

  1. ((a))

    Pentane Energy Nitrate

  2. ((b))

    Polyethylene Nitrogen Trinitrate

  3. ((c))

    Pyrotechnic Explosive Nitrogen Trigger

  4. ((d))

    Pentaerythritol Tetranitrate

Show Answer
Answer: ((a))

Pentane Energy Nitrate

121

Which of the following types of beams is used for lightly loaded beams such as roof purlins and sheeting rails?

  1. ((a))

    Angles sections 

  2. ((b))

    Castellated beams

  3. ((c))

    Box girders

  4. ((d))

    Plate girders 

Show Answer
Answer: ((a))

Angles sections 

122

Which type of roller is most suitable for compacting cohesive soils?

  1. ((a))

    Vibratory roller

  2. ((b))

    Smooth wheel roller

  3. ((c))

    Pneumatic roller

  4. ((d))

    Sheep foot roller

Show Answer
Answer: ((a))

Vibratory roller

123

Which of the following is the correct expression for the bending equation in pure bending?

(Where M = Bending moment, I = Moment of inertia of the cross-section about the neutral axis, f = Bending stress at a distance y from the neutral axis, y = Distance from the neutral axis, E = Modulus of elasticity, and R = Radius of curvature of the beam)

  1. ((a))

    MI=fy=RE\rm \frac{M}{I}=\frac{f}{y}=\frac{R}{E}

  2. ((b))

    IM=fy=ER\rm \frac{I}{M}=\frac{f}{y}=\frac{E}{R}

  3. ((c))

    MI=fy=ER\rm \frac{M}{I}=\frac{f}{y}=\frac{E}{R}

  4. ((d))

    MI=yf=ER\rm \frac{M}{I}=\frac{y}{f}=\frac{E}{R}

Show Answer
Answer: ((a))

MI=fy=RE\rm \frac{M}{I}=\frac{f}{y}=\frac{R}{E}

124

A prismatic bar of length 'L' and cross-sectional area 'A' is subjected to an axial tensile load 'P'. What is the maximum stress induced in the bar?

  1. ((a))

    2PA\rm \frac{2P}{A}

  2. ((b))

    PA\rm \frac{P}{A}

  3. ((c))

    PL\rm \frac{P}{L}

  4. ((d))

    P2A\rm \frac{P}{2A}

Show Answer
Answer: ((a))

2PA\rm \frac{2P}{A}

125

For a cantilever beam of length 'L' subjected to a uniformly distributed load (UDL) W (kN/m) over its entire length, what is the bending moment at the fixed end? 

  1. ((a))

    WL24\rm \frac{WL^2}{4}

  2. ((b))

    WL2\rm \frac{WL}{2}

  3. ((c))

    WL22\rm \frac{WL^2}{2}

  4. ((d))

    WL4\rm \frac{WL}{4}

Show Answer
Answer: ((a))

WL24\rm \frac{WL^2}{4}

126

Which type of scaffolding is most suitable for stone masonry work? 

  1. ((a))

    Single scaffolding

  2. ((b))

    Cantilever scaffolding

  3. ((c))

    Suspended scaffolding 

  4. ((d))

    Double scaffolding

Show Answer
Answer: ((a))

Single scaffolding

127

What is the primary load that a lintel resists?

  1. ((a))

    Shear load

  2. ((b))

    Bending load

  3. ((c))

    Axial load

  4. ((d))

    Lateral load

Show Answer
Answer: ((a))

Shear load

128

The quantity of flooring is measured in:

  1. ((a))

    m3 and the length, breadth and height are taken as outside dimensions from wall to wall of superstructure

  2. ((b))

    m2 and the length and breadth are taken as inside dimensions from wall to wall of superstructure

  3. ((c))

    m2 and the length and breadth are taken as outside dimensions from wall to wall of superstructure

  4. ((d))

    m3 and the length, breadth and height are taken as inside dimensions from wall to wall of superstructure

Show Answer
Answer: ((a))

m3 and the length, breadth and height are taken as outside dimensions from wall to wall of superstructure

129

What is the primary function of a pile cap in a deep foundation?

  1. ((a))

    To reduce the length of piles

  2. ((b))

    To prevent water ingress into the foundation 

  3. ((c))

    To distribute loads evenly among piles 

  4. ((d))

    To improve aesthetic appearance

Show Answer
Answer: ((a))

To reduce the length of piles

130

If the retaining wall moves away from the backfill, the value of coefficient of Rankine's earth pressure is given by: 

  1. ((a))

    (1 − sin φ) 

  2. ((b))

    (1 + sin φ)

  3. ((c))

    (1+sin⁡ϕ)(1−sin⁡ϕ)\rm \frac{(1+\sin \phi)}{(1-\sin \phi)}

  4. ((d))

    (1−sin⁡ϕ)(1+sin⁡ϕ)\rm \frac{(1-\sin \phi)}{(1+\sin \phi)}

Show Answer
Answer: ((a))

(1 − sin φ) 

131

What happens when the rate of precipitation is greater than the rate of infiltration?

  1. ((a))

    Rivers and lakes start to evaporate faster

  2. ((b))

    Groundwater recharge occurs

  3. ((c))

    Evaporation stops completely

  4. ((d))

    Surface runoff increases

Show Answer
Answer: ((a))

Rivers and lakes start to evaporate faster

132

The basic principle of surveying, 'working from whole part', is best represented by which of the following options?

  1. ((a))

    One can finish the traverse survey quickly.

  2. ((b))

    If an accurate basic control is established first, large errors can be prevented and minor ones controlled and localised. 

  3. ((c))

    Easiness in surveying. 

  4. ((d))

    It helps to continue the work during the second day of surveying. 

Show Answer
Answer: ((a))

One can finish the traverse survey quickly.

133

Which fastening system is commonly used with concrete sleepers in Indian Railways?

  1. ((a))

    Elastic Rail Clip

  2. ((b))

    Dog Spike

  3. ((c))

    Fang Bolt

  4. ((d))

    Fish Plate 

Show Answer
Answer: ((a))

Elastic Rail Clip

134

Identify the tool NOT used for stone dressing:

  1. ((a))

    Splitting chisel 

  2. ((b))

    Pestle

  3. ((c))

    Mash hammer

  4. ((d))

    Dressing knife

Show Answer
Answer: ((a))

Splitting chisel 

135

Which soil type is least suitable for shallow foundations?

  1. ((a))

    Silty clay

  2. ((b))

    Fine sand

  3. ((c))

    Black cotton soil

  4. ((d))

    Coarse sand 

Show Answer
Answer: ((a))

Silty clay

136

The pointing that facilitates easy draining of water is ______. 

  1. ((a))

    beaded pointing

  2. ((b))

    recessed pointing 

  3. ((c))

    tuck pointing

  4. ((d))

    struck pointing

Show Answer
Answer: ((a))

beaded pointing

137

Which of the following is NOT an effect of a force applied to a body?

  1. ((a))

    Change in direction of motion

  2. ((b))

    Change in shape 

  3. ((c))

    Change in mass 

  4. ((d))

    Change in motion

Show Answer
Answer: ((a))

Change in direction of motion

138

As per IS 10262:2009, what is the maximum mixing water content per unit volume of concrete for 20 mm nominal maximum size angular coarse aggregate, considering a slump range of 25 to 50 mm?

  1. ((a))

    186 kg/m3

  2. ((b))

    250 kg/m3

  3. ((c))

    200 kg/m3

  4. ((d))

    150 kg/m3

Show Answer
Answer: ((a))

186 kg/m3

139

Which of the following commands is used in Autodesk 3ds Max to create a new scene?

  1. ((a))

    Edit -> New Scene

  2. ((b))

    Create -> Scene Setup 

  3. ((c))

    File -> New

  4. ((d))

    File -> Open

Show Answer
Answer: ((a))

Edit -> New Scene

140

Which is the correct sequence for preparation of the surface for new pointing work?

  1. ((a))

    Wetting surface and joints; Raking Joints; Cleaning surface and joints

  2. ((b))

    Cleaning surface and joints; Raking joints; Wetting surface and joints

  3. ((c))

    Raking joints; Cleaning surface and joints; Wetting surface and joints

  4. ((d))

    Cleaning surface and joints; Wetting surface and joints; Raking joints 

Show Answer
Answer: ((a))

Wetting surface and joints; Raking Joints; Cleaning surface and joints

141

Which of the following statements are correct with respect to estimation of water tanks?

A: Water proofing compounds are added in plaster of water tank walls.

B: Item particulars in estimate of water tanks, does not include estimate of ladder to be built around it.

C: When the vertical and horizontal walls of tanks meet, a sloping structure is built at their intersection, this is called haunching.

D: When the vertical and horizontal walls of tanks meet, a sloping structure is built at their intersection, this is called soling.

  1. ((a))

    A and D

  2. ((b))

    B and C

  3. ((c))

    A and C

  4. ((d))

    B and D

Show Answer
Answer: ((a))

A and D

142

What is a particle board made up of?

  1. ((a))

    Layers of odd number veneers glued under pressure

  2. ((b))

    Wood fibres and synthetic resin moulded together

  3. ((c))

    Strips of thin wood glued between two veneers

  4. ((d))

    Wood chips in a binder pressed under heat/pressure

Show Answer
Answer: ((a))

Layers of odd number veneers glued under pressure

143

Half round country tiles are laid in pairs of _________.

  1. ((a))

    lap tile and overlap tile

  2. ((b))

    bottom tile and crown tile

  3. ((c))

    under tile and over tile

  4. ((d))

    base tile and covering tile

Show Answer
Answer: ((a))

lap tile and overlap tile

144

How does adding more fine aggregate affect the properties of Ready Mix Concrete (RMC)?

  1. ((a))

    Improves compressive strength directly

  2. ((b))

    Enhances resistance to freezing and thawing

  3. ((c))

    Increases setting time

  4. ((d))

    Increases workability

Show Answer
Answer: ((a))

Improves compressive strength directly

145

How is the design shear strength of concrete (c ) influenced by the percentage (pt ) of tensile reinforcement in a beam?

  1. ((a))

    Decreases with an increase in tensile reinforcement percentage 

  2. ((b))

    Increases up to 2% of tension reinforcement and decreases if the tension reinforcement exceeds 2% 

  3. ((c))

    Increases with an increase in tensile reinforcement percentage 

  4. ((d))

    Remains constant regardless of tensile reinforcement percentage 

Show Answer
Answer: ((a))

Decreases with an increase in tensile reinforcement percentage 

146

In a singly reinforced beam, the reinforcement is provided in which zone?

  1. ((a))

    Entire cross-section 

  2. ((b))

    Both tension and compression zones

  3. ((c))

    Only tension zone

  4. ((d))

    Only compression zone

Show Answer
Answer: ((a))

Entire cross-section 

147

Which of the following states in India has the maximum potential for wind energy?

  1. ((a))

    Punjab

  2. ((b))

    Gujarat

  3. ((c))

    Himachal Pradesh

  4. ((d))

    Uttar Pradesh 

Show Answer
Answer: ((a))

Punjab

148

Shooting concrete under pressure with hose pipe and nozzle to repair damaged concrete areas is known as _____.

  1. ((a))

    curing

  2. ((b))

    sealing

  3. ((c))

    concreting

  4. ((d))

    guniting 

Show Answer
Answer: ((a))

curing

149

In planning a residence, the principle of orientation is adopted to ensure:

  1. ((a))

    beautiful aesthetic appearance of the residence

  2. ((b))

    rooms are oriented to achieve the required privacy

  3. ((c))

    natural elements are used effectively in the design

  4. ((d))

    proper sanitation and hygiene in the residence

Show Answer
Answer: ((a))

beautiful aesthetic appearance of the residence

150

Which of the following environmental factors negatively affects the durability of concrete?

  1. ((a))

    High temperature and humidity variations

  2. ((b))

    Dry conditions with proper curing done

  3. ((c))

    Stable temperature with no moisture changes

  4. ((d))

    Well-ventilated surroundings

Show Answer
Answer: ((a))

High temperature and humidity variations

Attempt this paper under real exam conditions

Timed interface, section switching, instant scoring, and question-by-question analytics — free.

Start Timed Attempt