RRB JE ME 19 Sep 2019 (Shift 2) CBT 2 Official Paper (Previous Year Paper)

When was 'Antyodaya Anna Yojana' launched?

The ratio between net work for one cycle in a process and displacement volume is -

Calcium oxide and water combine to form calcium hydroxide. This is an example of __________ reaction.

To measure which of the following is an ammeter used?

With which of the following sports is Black Pearl associated?

The brain interprets the frequency of an emitted sound called -

A ray of light passing through principal focus of a convex lens after refraction will emerge -

The operation involving light and rapid hammering on the weld soon after welding, to relieve stress is called -

_______________ is a weld where the size of the weld is the same as the thickness of the thinner object joined together.

Odisha shares its border with ________ Indian states.

The ratio of brake power to indicated power is called -

A typical S-N curve for a material is related to _________ failure assessment.

Convert 373⁰ C into Kelvin scale.

With the increase in atomic number in period -

Galvanization is the process of coating a metal with -

Nuclides which have same mass number are called -

With which sport is the term 'Beamer' associated?

A group of stars, which has a recognisable shape is called as -

Which of the following is difficult without friction?

_____________ is known as balanced flame.

Which great personality of the world was also known as 'Fuehrer'?

What is the name of world's first robot citizen created in October 2017?

Who is the present CBI Director? (September 2019)

The rate of change of momentum of an object is -

In 2019, which country launched a new export route to India through the Chabahar Port?

Which type of paint is manufactured by dissolving asphalt or vegetable bitumen in oil or petroleum?

Which of the following is a physical property of a metal?

The first Chairperson of the National Green Tribunal (NGT) was -

Which country is the host of ICC Women's T20 World Cup 2020?

Which of the following is a ferrous material?

Which of the following materials has the lowest melting point?

When was the Gandhi - Irwin pact carried out?

The ocean covers ________ percentage of Earth’s surface.

_______________ is a solid state welding process in which coalescence is effected by high - velocity movement together of the parts to be joined produced by a controlled detonation.

When did India first take part in the Olympic Games?

A rectangular channel that carries a discharge of 5 m³/sec is 2 m wide. The critical depth of the flow is -

Which of the following animals was under the category of “critically endangered species” till 2008, later upgraded to "endangered species"?

How many zones are there in neutral flame?

The ratio of the electrode diameter to core diameter is -

Who has been appointed as the Chairman of India’s Lokpal or anti-corruption ombudsman?

The important pass that links Kerala with Tamil Nadu is -

'Swing over carriage' of a lathe refers to which of the following?

Which of the following is used as energiser in pack carburising?

The binary equivalent of the decimal number 10 is __________.

The crystal structure of α-iron is -

Which of the following is NOT involved in five M's in production or operations management?

The ratio of specific heat of air at constant pressure to the specific heat of air at constant volume is equal to -

A Bell - Coleman cycle is a reversed -

When a structural member is strained due to external imposed loads, the energy stored is called -

A circular cylinder partly filled with a liquid is rotated about its axis at ω rad/s without spilling. At the walls, the rise of liquid surface above the original level will be -

A material which fails suddenly without any plastic deformation is said to be -

The term PAN in chemical refers to -

MAC address is of :

The ruby rod used in lasers is made of -

Which of the following statements is TRUE about anodising?

The B-H curve for ______ will be a straight line passing through the origin.

A Mcleod gauge is used to measure -

The distance transversed by a particle along the straight line in t seconds is represented by x = t³ (t - 6), the acceleration of the particle will be given by the equation :

In M - L - t - T system, the dimension of thermal diffusivity is -

If the zero of the vernier scale is on the right of zero of the main scale, then the -

Rutherford's alpha particle scattering experiment was responsible for the discovery of -

The 3 R principle in waste management involves -

The range of a projectile is maximum, when the angle of projection is -

Capillary tube viscometers used for measurement of viscosity are based on -

For a column of length (L) and flexural rigidity (EI) which has one end fixed and other end free, the expression for critical load is given as -

Which of the following type of layout is suitable for automobile manufacturing concern?

In source data entry devices, what is full form of OMR?

Single point thread cutting tool should ideally have:

The three forces of 100 N, 200 N and 300 N have their lines of action parallel to each other but act in opposite directions. These forces are known as -

For grade IT 7, value of tolerance is equal to -

(where IT - International Tolerance and i - standard tolerance unit/factor)

Centre of buoyancy is -

In MS - Excel, what is the shortcut key you can press to Select the entire row?

In the number drill series, the largest drill size is _________.

In Gmail, the email address of the recipients can be entered in __________ field.

Moment of inertia of a rectangular section having width (b) and depth (d) about an axis passing through its C.G. and parallel to the depth is

The dodo was extinct due to -

Identify the non - renewable source of energy from the following.

Rails of railway track are welded by -

In a thick cylinder pressurized from inside, the hoop stress is maximum at :

_______ .has the highest value of Poisson's ratio

Aeroplane and certain automobile parts are usually made of -

A shaft of 50 mm diameter and 0.7 m long is subjected to a torque of 1200 Nm. Calculate the shear stress.

Which of the following lines is known as the trend line?

Which industry flourishes in Nepanagar?

The above given diagram is ________ surface grinding machine.

Silica is -

Two forces of magnitude 6 N and 10 N are inclined at an angle of 60° with each other. The magnitude of the resultant force is -

In an iron - carbon alloy, the content of carbon is stated to be 4.3 percent. Such a cast iron is known as -

The letter K in the conventional abrasive wheel specified by 51 A 60 K 5 V 05 denotes the -

Which of the following statements is FALSE about CPM?

In inventory control theory, the Economic Order Quantity is

Cutting ratio is the ratio of -

Sherardizing is a corrosion resistant coating of ________on the surface of iron.

For laminar flow through a pipe, the friction factor -

The Moment of Inertia of a body does not depend upon -

Which of the following planers are specially designed for cutting the edges of heavy steel plates, pressure vessels and armoured plates?

__________ is the process used to shine metal, wood, or composites using a cloth wheel impregnated with cutting compounds or rouges.

Chatter in machine tools is caused due to -

Negative slack occurs when -

______ is the process used for applying a protective finish to metallic objects.

The output is high only if one of the input is high. The above statement represents _____

Which of the following theorem states that the algebraic sum of the moments of a system of coplanar forces about a moment centre in their plane is equal to the moment of their resultant force about the same moment centre?

Which of the following is known as the Hermaphrodite caliper?

Which of the following types of medicine is used for treating indigestion?

The specific speed of a centrifugal pump is defined as the speed of geometrically similar pump which would -

The ratio of specific weight of a liquid to the specific weight of pure water at a standard temperature is called -

Dalton's law states that the total pressure of the mixture of gases is equal to -

An email address consists of _____ parts.

Piston compression rings are made of -

Stress at any point in a material is defined as -

When work piece is fed in the same direction as that of the cutter tooth at the point of contact, that type of milling is known as -

In PERT analysis, the possible number of time estimates for activities linking up two events are -

When a peripheral device needs immediate attention from the operating system, it generates a(n) :

The pour point of any specific fuel is defined as -

The relationship between tool life (T) and cutting speed (V) m/min is given as -

Which of the following is NOT a stylus probe instrument?

In ABC analysis, the C items are those which represents -

Silver article become black on prolonged exposure to air. This is due to formation of 

The value of modulus of elasticity for steel is -

Which of the following beams is likely to have the point of contraflexure?

Which of the following is NOT a part of micrometer?

A fine grained steel is -

Which of the following is a scalar quantity?

“Ozone Hole” is a -

What is the standard unit for luminous intensity?

Which of the following is used to cut any text or field in MS-Excel?

Which of the following instruments is used to measure the surface roughness?

Bin cards are used in keeping record of -

A cantilever beam is one which is -

Which of the following parameters indicates the spacing between the abrasive grains of a grinding wheel?

Which of the following fits is classified under transition fit?

Bauxite is used for -

Which of the following describes the orificemeter?