The most reliable field test to determine the bearing capacity of a soil is -
- ((a))
Plate load test
- ((b))
Direct shear test
- ((c))
Sounding test
- ((d))
Cone penetration test
Show Answer
Plate load test
150 questions · 120 minutes · with answers · free
The most reliable field test to determine the bearing capacity of a soil is -
Plate load test
Direct shear test
Sounding test
Cone penetration test
Plate load test
The short height wall constructed above Roof Slab in open terrace is called as
Boundary Wall
Partition Wall
Plinth Wall
Parapet Wall
Boundary Wall
Steam curing is used in-
Columns only
All of the options
Long slabs and columns
Mass production of precast concrete
Columns only
PIEV represents -
Perception - Intellection – Emotion – Volition
Passenger Information for Emergency Vehicle
Process - Intimation - Execution - Valuation
Passenger – Intersection – Entry / Exit - Velocity
Perception - Intellection – Emotion – Volition
In which year was India declared a Republic?
1948
1950
1947
1955
1948
What is the formula of Ammonium Sulphate?
NH4SO3
NH3SO4
NH4SO4
(NH4)2SO4
NH4SO3
Fresh and pure snow reflectance:
Is very high in visible region
Remains low for longer wave lengths
Falls off steeply in the near-IR region
All of the options
Is very high in visible region
Arrange the following media - solids, liquids and gases, in descending order of speed of sound through them.
Solids, liquids, gases
Solids, gases, liquids
Gases, liquids, solids
Liquids, solids, gases
Solids, liquids, gases
Which of the following members is/are subjected to compressive stress?
Pillars
All of the options
Struts
Columns
Pillars
Which of the following countries won the Badminton Asia Mixed Team Championships, 2019?
Malaysia
Sweden
China
India
Malaysia
In split tension test, the nature of testing is -
Cylindrical specimen is subjected to axial compression on its longitudinal curved surface area
Cylindrical Specimen is subjected to axial tension on its longitudinal curved surface area
Cubical specimen is subjected to axial compression on its diagonal axis
Cylindrical Specimen is subjected to axial compression on its cross sectional circular surface area
Cylindrical specimen is subjected to axial compression on its longitudinal curved surface area
Minimum voids in aggregates can be obtained by using
Aggregates of varying sizes
Manufactured aggregates
Aggregates of the same shape
Aggregates all of the same size
Aggregates of varying sizes
Which of the following is NOT a computer hardware?
Software
CPU
Floppy disk
Motherboard
Software
Non-colloidal liquids are:
Newtonian fluids
Ideal fluids
Dilatant fluids
Plastic fluids
Newtonian fluids
Intermixing of particles of two different types of matter on their own is called ________
Condensation
Effusion
Fission
Diffusion
Condensation
As per IS codes, the characteristic yield strength for hot rolled high yield strength deformed bars is
50 N/mm2
500 N/mm2
415 N/mm2
250 N/mm2
50 N/mm2
With which of the following sports is the term 'double fault' associated?
Tennis
Baseball
Bridge
Golf
Tennis
Under what situation will a gusseted base be provided in a column?
Column size is larger
Column size is smaller
Column carries higher load
Column carries lesser load
Column size is larger
Pick up the correct statement from the following:
Phytoplankton doesn't contain photosynthetically active pigment
An increase of phytoplankton decreases the backscattering in the green region
An increase of phytoplankton increases the back scattering in the green region
An increase of phytoplankton absorbs the blue region rapidly
Phytoplankton doesn't contain photosynthetically active pigment
If the soil has a very low bearing capacity and still if piles are not a feasible option, then the best choice is -
Mat raft
Individual footings
Strap foundation
Combined footings
Mat raft
The ratio of the head recovered to the head put in, is known as
Modular limit
Flexibility
Efficiency
Sensitivity
Modular limit
The height of the pilot's eye above the runway surface is assumed as
4 m
3 m
1 m
5 m
4 m
The beam outside a wall up to the floor level above it is known as
Purlin
Lintel
Spandrel
Rafter
Purlin
Which of the following contains a large number of solar cells joined together with silver wires in a definite pattern?
Lead acid battery
Dry cell
Alkaline cell
Solar cell panel
Lead acid battery
Long narrow diameter steel pipes are used for conveying fresh concrete down to deep depths, especially below water bodies. These pipes are called as -
Pumping Pipes
Transaction Pipe
Tremie Pipe
Down Pipe
Pumping Pipes
Which finishing covers with a new protective layer over the whole surface area of walls constructed by brick or block Masonry?
Plastering
False Ceiling
Grouting
Pointing
Plastering
Medium thickness line-group of 2 mm are not used for
Dotted lines
Out lines
Cutting plane -lines
Dimension lines
Dotted lines
Which among the following ministries gives Medini Puraskar every year?
Ministry of Environment and Forests
Ministry of Culture
Ministry of Finance
Ministry of Law
Ministry of Environment and Forests
Slipform Paver is an equipment used for constructing -
Walls
Precast elements
Chimney
Pavements
Walls
The densification of a soil by means of mechanical manipulation is called
Compressibility
Soil stabilization
Compression
Compaction
Compressibility
Which of these musical instruments has a keyboard?
Shehnai
Harmonium
Santoor
Ghatam
Shehnai
The cheapest way to prevent the formation of diagonal bottom corner cracks in windows can be prevented by -
Providing RCC frame all round the rectangular opening
Providing Sill Beam
Using Concrete blocks for wall instead of bricks
Providing circular shaped window openings instead of rectangular openings
Providing RCC frame all round the rectangular opening
The restoring force per unit area set up inside a body is called
Stress
Mass
Strain
Elasticity
Stress
_____ is the greatest source of halogens.
All of the options
Sea
Lake water
Emissions from Automobiles
All of the options
When an object is viewed from different directions and from different distances, the appearance of the object will be different. Such a view is called___________.
Perspective view
Axonometric projection
Oblique projection
Isometric projection
Perspective view
Match the following.
| List – I | List – II | ||
|---|---|---|---|
| A) | Type of beam connection | 1. | Connecting members used |
| B) | Framed Connection | 2. | Flange cleats only |
| C) | Un-stiffened seated connection | 3. | Flange and web clips |
| D) | Stiffened seated connection | 4. | Web cleat only |
A – 1, B – 3, C – 2, D - 4
A – 4, B – 3, C – 2, D - 1
A – 3, B – 1, C – 4, D - 2
A – 3, B – 4, C – 2, D - 1
A – 1, B – 3, C – 2, D - 4
Which Chess championship title did grandmaster Viswanathan Anand win in the tournament held in Riyadh, Saudi Arabia in 2017?
Candidates Tournament
Chess World Cup
World Rapid chess Championship
World Senior Chess Championship
Candidates Tournament
Which of the following gases is obtained when metals react with dilute acids?
Hydrogen
Carbon dioxide
Nitrogen
Oxygen
Hydrogen
A flip-flop is a binary cell capable of storing _________ of information.
One bit
Zero bit
Byte
Eight bit
One bit
According to Archimedes principle, the upward force experienced by a body immersed in a fluid is equal to which of the following?
Total weight of the body and the fluid
Weight of the body
Weight of the fluid displaced by the body
Weight of the total fluid
Total weight of the body and the fluid
In order to determine the effects of force, acting on body, we must know
magnitude of the force
line of action of the force
nature of the force, i. e., whether the force is push or pull
All of the above
magnitude of the force
Which of the following is the dimensional formula for the specific speed of a turbine?
The default position of the UCS icon is positioned at _____ on the AutoCAD grid.
0, 0, 0
10, 10, 10
20, 20, 20
30, 30, 30
0, 0, 0
The value of the toughness index of most of soils lies between -
0 to 3
1 to 3.5
1 to 3
0 to 3.5
0 to 3
In a fixed beam of span 'L', a concentrated load 'W' divides it as 'a' & 'b'. The fixed end moments are:
All of the options
(Wb2a) / L2 & (Wa2b) / L2
(Wb2) / L & (Wa2) / L
Wb/L & Wa/L
All of the options
The ratio of the moment of inertia to the span length is called-
Relative stiffness
Distribution factor
Stiffness of the member
Carry over factor
Relative stiffness
Stress developed due to application of a load suddenly is ______ times that due to same load Being applied gradually.
0.5
2.0
4.0
1.0
0.5
Scattering of sunlight occurs due to the presence of
Crust
Atmosphere
Mantle
Core
Crust
If a beam or column becomes weak or found to be insufficient, the most effective way to increase its strength is by ____
Grouting
Plate Bonding
Jacketing
Micro concreting
Grouting
______ application provides a single platform for all Indian Citizens to access pan India eGov services ranging from Central to Local Government bodies and other citizen centric services.
UMANG
Bhoomi
Startup India
E-Sahaj
UMANG
Which of the following days is observed to commemorate the signature of the Montreal Protocol?
International Ozone Day
International Wildlife Conservation Day
World Health Day
International Day for Biological Diversity
International Ozone Day
The head of water over the centre of an orifice of diameter 20 mm is 1 m. The actual discharge through the orifice is 0.85 litre/s. Find the coefficient of discharge.
1.4
0.61
0.2
1
1.4
Who is the Chairman of the National Commission for Backward Classes? (As of Jan 2024)
Thalloju Achary
Hansraj Gangaram Ahir
Sudha Yadav
Kaushalendra Singh Patel
Thalloju Achary
If the soil is of expansive type, like in Black Cotton Soil, then the best foundation type is -
End bearing pile
Batter pile
Friction pile
Under-reamed pile
End bearing pile
Reverse Osmosis is a type of
Micro filtration
Dead end filtration system
Cross flow filtration system
Ion exchange method
Micro filtration
Virtusa Corporation tied up with _____ to organize the grand finale of the Second Edition of Carbon Zero Challenge.
IIT Bombay
IIT Madras
IIT Delhi
IIT Kharagpur
IIT Bombay
The rear wheels do not follow the same path as that of the front wheels. This phenomenon is called:
Extra widening
Coning of wheel
Transition curve
Off tracking
Extra widening
Major compound responsible for the destruction of stratospheric ozone layer is-
Carbon dioxide
Chlorofluorocarbon(CFC)
Methane
Oxygen
Carbon dioxide
In horizontal curves of Railway Tracks, Negative Super elevation means-
Negative super elevation is not at all possible in any curve
Both the outer and inner rails are at the same level
Outer rail is at a higher level than the inner rail
Outer rail is at a lower level than the inner rail
Negative super elevation is not at all possible in any curve
Which of the following is a kind of non-impact printer?
Ink-jet printers
Dot-matrix printers
Daisy-wheel printers
Line printers
Ink-jet printers
The hardest among the natural stones listed here is-
Limestone
Marble
Slate
Granite
Limestone
Which method is adopted to develop an approximate or conceptual estimate for perimeter works for buildings from the following?
Cost per square metre method
Cost per linear metre method
Base unit method
Cost per function method
Cost per square metre method
Which of the following is required to create an HTML document?
Search engine
Internet
Text editor
Browser
Search engine
Which of the following lines are used to show that the object is cut and then viewed?
Hidden lines
Centre lines
Hatching lines
Leader lines
Hidden lines
Which is the natural satellite of planet Earth?
Moon
Aryabhatta
Kalpana - 1
Insat
Moon
To ensure that compression flange of a beam is restrained from moving laterally, the cross section must be ____
Semi-compact
Slender
Plastic
Thin
Semi-compact
In MS-Excel, how to use Format Painter multiple times?
By double clicking on the Format Painter Icon
By single clicking on the Format Painter Icon
By clicking on Lock Format Painter Icon
Format Painter cannot be used multiple times
By double clicking on the Format Painter Icon
The fall which is used to minimise the disturbance and water impact at the fall is -
Inglis falls
Rapid falls
Sarda Type falls
Ogee falls
Inglis falls
Engine Sheds are used for
Help to change direction
To help for sideway shifting
Maintenance and repair
Help to change engine
Help to change direction
____ addresses are reserved for multicasting.
Class C
Class B
Class E
Class D
Class C
In building estimation, the specifications are classified as-
General and valued specifications
General and secondary Specifications
General and preliminary specifications
General and detailed specifications
General and valued specifications
The zero of the graduated circle of a prismatic compass is located at-
South end
East end
West end
North end
South end
Who is the Chairman of the 13th Finance Commission?
N.N. Vohra
Vijay Kelkar
Bimal Jalan
C. Rangarajan
N.N. Vohra
Which of the following metals are mixed with chromium to make stainless steel?
Copper and Chromium
Nickel and iron
Copper and Nickel
Copper and Silver
Copper and Chromium
Total distance covered in total time is termed as
Average speed
Variable speed
Uniform speed
Instantaneous speed
Average speed
First of the major environmental protection act to be promulgated in India was-
Noise pollution rules
The water act
The air act
The environment act
Noise pollution rules
In an aircraft, the fuselage includes
Passenger's chamber
Tail of aircraft
All of the options
Pilot's cabin
Passenger's chamber
Kanchi was the capital of _________.
The Cholas
The Chalukyas
The Rashtrakutas
The Pallavas
The Cholas
If the intercept on a vertical staff is observed as 0.75 m from a tacheometer, the horizontal distance between tacheometer and staff station is:
50 m
25 m
75 m
7.5 m
50 m
The crossing angle at the level crossing of road-rail crossing should NOT be less than-
20°
30°
25°
45°
20°
According to the concept of limit state design as per IS-456 : 2000, the probability of failure of a structure is:
0.8
0.9
0.0975
0.08
0.8
What is the conveyor system used for transporting loose materials like soil, ores, coal, concrete, etc. without the need for full total enclosure?
Belt conveyor
Screw conveyor
Bucket conveyor
Roller conveyor
Belt conveyor
The common type of staircase in buildings with two consecutive 90° direction changes at mid-landing slab level is:
Straight Flight Staircase
Ramp
Spiral Staircase
Dog-legged Staircase
Straight Flight Staircase
As per Indian Standard, the modular size of bricks is-
25 cm × 22 cm × 22 cm
21 cm × 10 cm × 10 cm
18 cm × 9 cm × 9 cm
19 cm × 9 cm × 9 cm
25 cm × 22 cm × 22 cm
In the slope deflection method, the equations are derived using-
Method of joints
Moment area theorems
Castigliano theorems
Double integration method
Method of joints
Up to which element was the law of Octaves found to be applicable?
Cobalt
Oxygen
Potassium
Calcium
Cobalt
Shielding glass contains -
Lead oxide
Fibre glass
Steel wires
Chrome
Lead oxide
Cavity wall is generally provided for-
Sound insulation
Heat insulation
All of the options
Prevention of dampness
Sound insulation
Honeycombing defect in RCC members is caused by -
Poor curing
Inadequate compaction
Shock waves
Chemical reaction
Poor curing
Mangalore Tiles belong to the category of -
Concrete tiles
Burnt clay tiles
Mosaic tiles
Slate tiles
Concrete tiles
In which state are the Bharatpur and Ranthambhore National Parks located?
Uttar Pradesh
Gujarat
Rajasthan
Madhya Pradesh
Uttar Pradesh
The chloride content of public water supplies should NOT exceed-
150 mg/L
50 mg/L
250 mg/L
80 mg/L
150 mg/L
When did Chernobyl nuclear disaster occur?
August 1987
April 1986
August 1989
April 1988
August 1987
To get a diminished, virtual and erect image of a tall building, which mirror is used?
Plane mirror
Convex mirror
Both concave and plane mirror
Concave mirror
Plane mirror
In which of the following states is the festival 'Chapchar Kut' celebrated?
Meghalaya
Assam
Mizoram
Sikkim
Meghalaya
Which of the following statements is correct about remote sensing?
The surface from which emergent radiance is constant in all directions is called Lambertian surface
The ratio of the reflected flux to incident flux is called reflectance which varies from 0 to 1
All of the options
The basic property used to identify objects is called signature
The surface from which emergent radiance is constant in all directions is called Lambertian surface
Centre lines, section lines are drawn using _____ Pencil
H
2H
3H or 4H
HB
H
Keeping in view, the feasibility order of magnitude, the preliminary, conceptual or budget estimates, are prepared by -
Construction manager
Owner himself/herself
Architect/engineer
All of the options
Construction manager
Combining two or more plots as a single plot is called -
Amalgamation
Building setback
Frontage
Bifurcation
Amalgamation
The stability of sub-grade in a pavement is influenced by-
Compaction
Water content
Rigidity
Materials used
Compaction
The main function of a diversion head works of a canal from a river is-
To raise water level
To store water
To control floods
To remove silt
To raise water level
A beam 10 m long, fixed at it ends, is subjected to a UDL of 10 kN/m. The fixed end moment is:
83.33 kNm
125 kNm
166.67 kNm
100 kNm
83.33 kNm
Which of the following air pollution control devices has maximum efficiency?
Dynamic precipitator
Spray tower
Wet cyclonic scrubber
Electrostatic precipitator
Dynamic precipitator
Out of the four processes listed, which is the last process?
Hardening
Compaction
Setting
Evaporation
Hardening
Bar A and bar B are made up of the same material and are of same length. But bar A has diameter ’d’ while bar B has diameter '2d'. If both are subjected to same axial load, the ratio of strain energy of bar A to strain energy of bar B is:
8
4
2
1
8
Line up to which the plinth of a building adjoining a street may be lawfully extended is called -
Building carpet
Building plan
Building line
Building extend
Building carpet
Modular ratio is the ratio between the Young's modulus of-
Sand and steel
Concrete and cement
Steel and concrete
Steel and cement
Sand and steel
When the quantities of the work items are difficult to be quantified and the rate analysis is also a complex issue, but still the contractor is willing to undertake a work, then the type of Contract best suited is:
Turn Key Contract
Labour Contract
Lump Sum Contract
Item Rate Contract
Turn Key Contract
Which soil will take years and decades to undergo full settlement after the new building is constructed?
Sand
Gravel
Silt
Clay
Sand
Castigliano's theorem falls under the category of-
Displacement method
Stiffness method
Force method
Equilibrium method
Displacement method
The life expectancy of aerial transport system (rope or cable way) is usually-
20 years
1 year
5 years
100 years
20 years
When an owner can borrow money against the security of property and interest is paid, then it is called as _____
Leasehold property
Mortgage
Freehold Property
Lease
Leasehold property
The type of hollow used when there is an elaborated window opening in the wall is -
Jamb block
Pillar block
Lintel block
Partition block
Jamb block
What is the full form of BCD?
Binary Coded Decimal
Binary Conduct Decimals
Binary Characters Decimal
Binary Coded Digitals
Binary Coded Decimal
A ________ is the person responsible for verifying that the drawings in a project set are free of mistakes.
Client
Receptionist
CAD trainee
Checker
Client
The maximum eccentricity to be considered in a R.C. column of length L is
(L/500) + (lateral dimension/30)
(L/500) + (lateral dimension/25)
(L/400) + (lateral dimension/25)
(L/400) + (lateral dimension/30)
(L/500) + (lateral dimension/30)
The test conducted by Vicat's apparatus is-
Consistency
Compression strength
Tensile Strength
Fineness
Consistency
Drop panel is a structural component in:
Grid floor
Flat plate
Slab-beam system of floor
Flat slab
Grid floor
The rate of construction of a hospital is expressed in terms of cost per head. This type of Estimate is called as _______
Plinth area estimate
Functional unit estimate
Approximate quantity estimate
Cubical content estimate
Plinth area estimate
The primary cause of acid rain around the world is-
Sulphur dioxide
Carbon dioxide
Carbon monoxide
Ozone
Sulphur dioxide
Which of the following is/are the functions of an operating system?
All of the options
File Management
Security
Memory Management
All of the options
Which of the following represents a circumpolar star?
Altitude at upper culmination is minimum
Upper culmination above horizon, lower culmination below horizon
Both upper and lower culmination above horizon
Both upper and lower culmination below horizon
Altitude at upper culmination is minimum
Which of the following statements is NOT correct?
In combined sewerage system, one set of sewers is laid for both sanitary sewage and storm water
In separate system, the design of sewage system is economical
As the sewage is diluted by storm water in combined sewage system, cost of treatment is low
In separate system, self cleaning velocities are easily available and occasional flushing is required
In combined sewerage system, one set of sewers is laid for both sanitary sewage and storm water
A flow is called hyper-sonic, if the Mach number is-
Less than unity
More than 6
Unity
Between 1 and 4
Less than unity
Where are the Andaman and Nicobar islands situated?
Arabian sea
Indian ocean
Bay of Bengal
Red sea
Arabian sea
In roofing sheet terminology, CGI means -
Corrugated Grating Iron
Corrugated Galvanized Iron
Coated Galvanized Iron
Coated Grating Iron
Corrugated Grating Iron
What is the coefficient of restitution (e) for elastic impact?
0
>1
1
<0
0
What is the binary representation of 32?
100001
100100
110000
100000
100001
Which of the following characteristics of ballast makes it unsuitable for use?
High modulus
High stability
High resilience
High water absorption
High modulus
Who presented the first Union Budget of Independent India?
N.K. Chanda
John Mathai
R.K. Shanmukham Chetty
Morarji Desai
N.K. Chanda
The type of valve which allows water to flow in one direction but prevents its flow in the reverse direction is
Sluice valve
Pressure relief valve
Air relief valve
Reflux valve
Sluice valve
M10 grade of concrete mixing ratio is approximately-
1 : 5 : 10
1 : 1 : 2
1 : 3 : 6
1 : 2 : 4
1 : 5 : 10
Which of the following is/are an example of piezoelectric material?
Lead zirconate titanate
Lithium niobate
Barium titanate
All of the options
Lead zirconate titanate
How many angular bleed lines are present in the 200 rupees note?
6
7
4
2
6
Helium atom has _____ electron(s) in its outermost shell.
One
Two
Four
Three
One
Colloidal particles are seen continuously in a zigzag path in
Brownian movement
Raman effect
Tyndall effect
Discrete particle
Brownian movement
Which of the following wall is constructed to resist the pressure of an earth filling?
Retaining wall
Breast wall
Parapet wall
Buttress
Retaining wall
Air pollution from automobiles and industries can be controlled by fitting ________
Wet collector(scrubber)
Catalytic converter
All of the options
Electrostatic precipitator
Wet collector(scrubber)
Who among the following was the first woman to win Wimbledon title successfully nine times?
Martina Navratilova
Chris Evert
Steffi Graf
Monica Seles
Martina Navratilova
If the harmful salt present in the soil is Sodium carbonate, it can be neutralized by the addition of
Magnesium carbonate
Magnesium sulphate
Calcium carbonate
Calcium sulphate
Magnesium carbonate
DPC means-
Damp Plain Concrete
Damp Proof Course
Dampness Permeable Concrete
Damp Prevention Course
Damp Plain Concrete
A ________ is a system designed to prevent unauthorized access to or from a private network.
Web page
Packet
Firewall
Server
Web page
According to the Indian Standard Institution (ISI), what is the size of a A3 sheet in mm?
1189 x 841
297 x 210
841 x 594
420 x 297
1189 x 841
According to which theory of failure does the ductile material begin to yield, when the maximum principal strain reaches the strain?
Rankine's theory
Haigh's theory
St. Venant's theory
Guest theory
Rankine's theory
______ is the ratio of the volume of voids to the total volume of the given soil.
Degree of saturation
Void ratio
Porosity
Air content
Degree of saturation
Maximum principal stress failure theory is also called _________ theory.
Rankine
Tresca
Tsai-Wu
Tsai Hill
Rankine
Which of the following is Quicklime?
CaCO3
CaO
Ca(OH)2
CaCl2
CaCO3
The moisture content of a well seasoned wood is in the range-
10-12%
60-65%
48-210%
27-35%
10-12%
Mild steel is used in the manufacture of _____
Compression members
Cutting tools
Rolled steel Sections
Tension members
Compression members
To comply with current building regulations, the minimum cavity width in an external wall is ____
70 mm
50 mm
100 mm
60 mm
70 mm
Timed interface, section switching, instant scoring, and question-by-question analytics — free.
Start Timed Attempt