Official Paper

RRB ALP Mechanic Diesel 23 Jan 2019 Official Paper (Shift 3) (Previous Year Paper)

175 questions · 150 minutes · with answers · free

Attempt as Timed Mock Test

Part A (100 questions)

1

Name the scientist who discovered bacteria ?

  1. ((a))

    Robert Koch

  2. ((b))

    James Chadwick

  3. ((c))

    Eugen Goldstein

  4. ((d))

    A V Leeuwenhoek

Show Answer
Answer: ((a))

Robert Koch

2

If a body has a specific gravity of less than 1, then it will float in/on ___________.

  1. ((a))

    air

  2. ((b))

    water

  3. ((c))

    liquids

  4. ((d))

    mercury

Show Answer
Answer: ((a))

air

3

Which of the following options does not have an SI base unit?

  1. ((a))

    Amount of substance

  2. ((b))

    Frequency

  3. ((c))

    Luminous intensity

  4. ((d))

    Electric current

Show Answer
Answer: ((a))

Amount of substance

4

How many medals did India win in Rio Olympics, 2016?

  1. ((a))

    3

  2. ((b))

    4

  3. ((c))

    2

  4. ((d))

    5

Show Answer
Answer: ((a))

3

5

It is mainly due to the gravitational effect of the __________ on the rotating earth that the level of water in the sea rises and falls.

  1. ((a))

    Venus

  2. ((b))

    Mercury

  3. ((c))

    Moon

  4. ((d))

    Sun

Show Answer
Answer: ((a))

Venus

6

Two resistance of 2Ω and 6Ω are connected in series and this combination is connected across a 12 V battery. Find the current in the 6Ω resistor.

  1. ((a))

    3.5 A

  2. ((b))
    1. 5 A
  3. ((c))

    0.5 A

  4. ((d))

    2.5 A

Show Answer
Answer: ((a))

3.5 A

7

Substances that are broken down by biological processes are said to be _________.

  1. ((a))

    reusable

  2. ((b))

    non-biodegradabl

  3. ((c))

    non-reusable

  4. ((d))

    biodegradable

Show Answer
Answer: ((a))

reusable

8

A software program that has been developed to harm other computers is called a/an _________.

  1. ((a))

    server

  2. ((b))

    LAN

  3. ((c))

    malware

  4. ((d))

    operating system

Show Answer
Answer: ((a))

server

9

Kuchipudi has its roots in which Indian State?

  1. ((a))

    Arunachal Pradesh

  2. ((b))

    Kerala

  3. ((c))

    Andhra Pradesh

  4. ((d))

    Himachal Pradesh

Show Answer
Answer: ((a))

Arunachal Pradesh

10

Which Indian cricketer received the Padma Bhushan in 2018?

  1. ((a))

    MS Dhoni

  2. ((b))

    Virat Kohli

  3. ((c))

    Sachin Tendulkar

  4. ((d))

    Saurav Ganguly

Show Answer
Answer: ((a))

MS Dhoni

11

JPEG stands for __________.

  1. ((a))

    Joint Program Experts Group

  2. ((b))

    Joint Program Executing Group

  3. ((c))

    Joint Photographic Experts Group

  4. ((d))

    Joint Program Experimental Group.

Show Answer
Answer: ((a))

Joint Program Experts Group

12

Two resistors, one of 12 Ω and the other of 24 Ω are connected in parallel. This combination is connected in series with a 22 Ω resistor and a 12 V battery. The current in the 12 Ω resistor is __________.

  1. ((a))

    (8/15) A

  2. ((b))

    (2/15) A

  3. ((c))

    (6/15) A

  4. ((d))

    (4/15) A

Show Answer
Answer: ((a))

(8/15) A

13

RK Narayan is famous for his book ___________.

  1. ((a))

    The Room on the Roof

  2. ((b))

    Two Livers

  3. ((c))

    Malgudi Days

  4. ((d))

    A suitable Boy

Show Answer
Answer: ((a))

The Room on the Roof

14

_________ protection must be worn whenever noise levels exceed the noise exposure standard.

  1. ((a))

    Hearing

  2. ((b))

    Head

  3. ((c))

    Eye

  4. ((d))

    Foot

Show Answer
Answer: ((a))

Hearing

15

A wire of length 1 and radius r has a resistance R. The resistance of another wire made of the same material but having half its length and half its radius will be.

  1. ((a))

    4R

  2. ((b))

    R/2

  3. ((c))

    2R

  4. ((d))

    R

Show Answer
Answer: ((a))

4R

16

Safety boots or shoes must be worn in designated areas to protect your _______  from falling objects.

  1. ((a))

    eye

  2. ((b))

    ear

  3. ((c))

    head

  4. ((d))

    feet

Show Answer
Answer: ((a))

eye

17

A cylindrical wire of length L and radius r has a resistance of R. The resistance of another wire of the same material but thrice its length and one-third its radius will be __________.

  1. ((a))

    27R

  2. ((b))

    9R

  3. ((c))

    R

  4. ((d))

    3R

Show Answer
Answer: ((a))

27R

18

If a body is NOT homogeneous, then its density is a function of its ___________.

  1. ((a))

    pressure

  2. ((b))

    acceleration

  3. ((c))

    position

  4. ((d))

    velocity

Show Answer
Answer: ((a))

pressure

19

Two resistors of 10Ω and 20 Ω area connected in series and this combination is connected across a 30 V supply voltage. Find the voltage across the 10 Ω resistor.

  1. ((a))

    20 V

  2. ((b))

    10 V

  3. ((c))

    5 V

  4. ((d))

    15 V

Show Answer
Answer: ((a))

20 V

20

Which one of these is a harvest festival? 

  1. ((a))

    Teej

  2. ((b))

    Janmashtami

  3. ((c))

    Deepawali

  4. ((d))

    Onam

Show Answer
Answer: ((a))

Teej

21

86°F is equal to __________

  1. ((a))

    20°C

  2. ((b))

    30°C

  3. ((c))

    34°C

  4. ((d))

    10°C

Show Answer
Answer: ((a))

20°C

22

Where is the Headquarters of UNESCO located?

  1. ((a))

    New York City

  2. ((b))

    Geneva

  3. ((c))

    Paris

  4. ((d))

    Washington DC

Show Answer
Answer: ((a))

New York City

23

Name of the painter of famous painting, ‘Mahishasura’.

  1. ((a))

    MF Hussain

  2. ((b))

    Amrita Sher-Gil

  3. ((c))

    Raja Ravi Verma

  4. ((d))

    Tyeb Mehta

Show Answer
Answer: ((a))

MF Hussain

24

What is the work that needs to be done to increase the speed of a 1 kg ball from 2 m/s to 4 m/s?

  1. ((a))

    8 J

  2. ((b))

    10 J

  3. ((c))

    6 J

  4. ((d))

    12 J

Show Answer
Answer: ((a))

8 J

25

The Ajanta Caves in Maharashtra feature paintings and sculptures that depict __________ tales.

  1. ((a))

    Arabic

  2. ((b))

    Islamic

  3. ((c))

    Buddhist

  4. ((d))

    Maratha

Show Answer
Answer: ((a))

Arabic

26

The volume of a given amount of water ________ between 0°C to 4°C.

  1. ((a))

    is zero

  2. ((b))

    decreases

  3. ((c))

    remains constant

  4. ((d))

    increases

Show Answer
Answer: ((a))

is zero

27

Two resistance of 2Ω and 6Ω are connected in series and this combination is connected across a 12 V  bettery. Find the power supplied by the battery.

  1. ((a))

    10 W

  2. ((b))

    18 W

  3. ((c))

    16 W

  4. ((d))

    14 W

Show Answer
Answer: ((a))

10 W

28

An object weighs X units on the earth. If we take the same object to the moon, its weight there will be ________.

  1. ((a))

    zero

  2. ((b))

    less than X

  3. ((c))

    equal to X

  4. ((d))

    more than X

Show Answer
Answer: ((a))

zero

29

A body starts from rest. Its displacement is proportional to _________ when its acceleration is constant.

  1. ((a))

    time squared

  2. ((b))

    velocity

  3. ((c))

    work

  4. ((d))

    time

Show Answer
Answer: ((a))

time squared

30

A source of voltage V maintains a current i in a circuit. The energy supplied to the circuit by the source in time t is __________.

  1. ((a))

    Vit

  2. ((b))

    1/Vit

  3. ((c))

    Vi/t

  4. ((d))

    V/it

Show Answer
Answer: ((a))

Vit

31

Who was the first governor of the Reserve Bank of India?

  1. ((a))

    Sir James Braid Taylor

  2. ((b))

    KR Puri

  3. ((c))

    HVR Iyengar

  4. ((d))

    Sir Osborne A Smith

Show Answer
Answer: ((a))

Sir James Braid Taylor

32

A car covers 400 m in 20 seconds. Find the average speed (in km/hr) of the car. 

  1. ((a))

    72

  2. ((b))

    124

  3. ((c))

    108

  4. ((d))

    36

Show Answer
Answer: ((a))

72

33

If sin θ = 15/17, then cot θ = ? 

  1. ((a))

    815\frac{8}{{15}}

  2. ((b))

    817\frac{8}{{17}}

  3. ((c))

    158\frac{{15}}{8}

  4. ((d))

    1715\frac{{17}}{{15}}

Show Answer
Answer: ((a))

815\frac{8}{{15}}

34

In an examination, the highest score and the lowest score are different by 55 and the higher one was 9/4 times the lower one. Find the lowest score.

  1. ((a))

    40  

  2. ((b))

    36

  3. ((c))

    44

  4. ((d))

    48

Show Answer
Answer: ((a))

40  

35

A number is as much greater than 50 as it is lesser than 84. What is the number?

  1. ((a))

    65

  2. ((b))

    66

  3. ((c))

    68

  4. ((d))

    67

Show Answer
Answer: ((a))

65

36

If x=125×30×6x = \sqrt {125} \times \sqrt {30} \times \sqrt 6  ,  then x is equal to:

  1. ((a))

    175

  2. ((b))

    125

  3. ((c))

    136

  4. ((d))

    150

Show Answer
Answer: ((a))

175

37

A got Rs. 80 as his share of profit where the total profit was Rs. 240 and the ratio of profit distribution between A and B was x : 2. What is the value of x? 

  1. ((a))

    1

  2. ((b))

    4

  3. ((c))

    2

  4. ((d))

    5

Show Answer
Answer: ((a))

1

38

What is the median of 8, 5, 7, 9, 11, 6, 10?

  1. ((a))

    9

  2. ((b))

    8

  3. ((c))

    10

  4. ((d))

    7

Show Answer
Answer: ((a))

9

39

If 5050 × 0.5x = 25250, then 2505 ÷ x2 = ?

  1. ((a))

    0.2505

  2. ((b))

    25.05

  3. ((c))

    2.505

  4. ((d))

    250.5

Show Answer
Answer: ((a))

0.2505

40

An article of marked price Rs. 12000 was sold. Had a discount of 15% been offered, a profit of 2% would have been made. What was the cost price?

  1. ((a))

    Rs. 10,200

  2. ((b))

    Rs. 10,000

  3. ((c))

    Rs. 11,000

  4. ((d))

    Rs. 10,800

Show Answer
Answer: ((a))

Rs. 10,200

41

A sum of Rs. 2,000 was spent in buying a pair of trousers. The sum spent was 2/5th of the total money Shashi had with her. How much was the total money she had?

  1. ((a))

    Rs. 4,000

  2. ((b))

    Rs. 4, 250 

  3. ((c))

    Rs. 4, 750

  4. ((d))

    Rs. 5,000 

Show Answer
Answer: ((a))

Rs. 4,000

42

A machine was bought for Rs. 1,500 and a repairing charge of Rs. 100 was paid afterwards. At what price should it be sold to gain a profit of 25%?

  1. ((a))

    Rs. 2,040

  2. ((b))

    Rs. 1,960

  3. ((c))

    Rs. 2,000

  4. ((d))

    Rs. 1, 920

Show Answer
Answer: ((a))

Rs. 2,040

43

In angular measurement, one radian is equivalent to ________ degree (approximately).

  1. ((a))

    65.27

  2. ((b))

    57.27

  3. ((c))

    90

  4. ((d))

    180

Show Answer
Answer: ((a))

65.27

44

A and B can do a work in 15 days. B and C can do the work in 20 days and A and C can do the work in 10 days. In how many days will they together completed the work?

  1. ((a))

    10.67 days

  2. ((b))

    10.91 days

  3. ((c))

    10.71 days

  4. ((d))

    9.23 days

Show Answer
Answer: ((a))

10.67 days

45

Pipes A and B can fill a tank in 12 minutes and 16 minutes respectively. Both A and B are opened for 4 minutes and then A is closed. How much extra time will B take to fill the tank completely?

  1. ((a))

    203\frac{{20}}{3} minutes

  2. ((b))

    7 minutes

  3. ((c))

    214\frac{{21}}{4} minutes

  4. ((d))

    6 minutes

Show Answer
Answer: ((a))

203\frac{{20}}{3} minutes

46

A can do 2/5 of a work in 10 days. B can do ½ of the some work in 10 days. They worked together for 5 days and then A left. In how many days will B finish the remaining work?

  1. ((a))

    8

  2. ((b))

    10

  3. ((c))

    11

  4. ((d))

    9

Show Answer
Answer: ((a))

8

47

Reflection of point (-2, -6) on the Y-axis is:

  1. ((a))

    (2, 6)

  2. ((b))

    (-6, -2)

  3. ((c))

    (-2, 6)

  4. ((d))

    (2, -6)

Show Answer
Answer: ((a))

(2, 6)

48

The pie chart shows the breakup in percentage of the various expenses of a Company. Study the diagram and answer the following question. 

What is the interest expense if total expenses is Rs. 25000.

  1. ((a))

    Rs. 2, 500

  2. ((b))

    Rs. 1, 800

  3. ((c))

    Rs. 9, 000

  4. ((d))

    Rs. 5, 000

Show Answer
Answer: ((a))

Rs. 2, 500

49

A motorcycle travelled 1000 m at 36 km/hr. Find the time (in seconds) taken by the motorcycle to cover this distance.

  1. ((a))

    300

  2. ((b))

    100

  3. ((c))

    400

  4. ((d))

    200

Show Answer
Answer: ((a))

300

50

A 4-digit number 1xy7 is divisible by 11. What is the value of x - y?

  1. ((a))

    -8

  2. ((b))

    -2

  3. ((c))

    -4

  4. ((d))

    -6

Show Answer
Answer: ((a))

-8

51

Tap M and N can together fill a cistern in 48/13 minutes. N alone can fill it in 6 minutes. How much time will M alone take to fill the cistern?

  1. ((a))

    9.6 minutes

  2. ((b))

    9 minutes

  3. ((c))

    9.4 minutes

  4. ((d))

    8.6 minutes

Show Answer
Answer: ((a))

9.6 minutes

52

What is the curved surface area of a hemisphere whose radius is 7 cm? (take π = 22/7)

  1. ((a))

    616 cm2

  2. ((b))

    154 cm2

  3. ((c))

    308 cm2

  4. ((d))

    924 cm2

Show Answer
Answer: ((a))

616 cm2

53

An airplane flies at the speed of 50 m/s. How much distance (in km) will it cover in a flight of 5 hours?

  1. ((a))

    895

  2. ((b))

    850

  3. ((c))

    880

  4. ((d))

    900

Show Answer
Answer: ((a))

895

54

What is the distance between the points (4, 3) and (3, -2)?

  1. ((a))

    26\sqrt {26}

  2. ((b))

    24\sqrt {24}

  3. ((c))

    6

  4. ((d))

    5

Show Answer
Answer: ((a))

26\sqrt {26}

55

sec 45° - tan 60° = ? 

  1. ((a))

    −3+2 - \sqrt 3 + \sqrt 2

  2. ((b))

    −3−2 - \sqrt 3 - \sqrt 2

  3. ((c))

    32\frac{{\sqrt 3 }}{2}

  4. ((d))

    3+2\sqrt 3 + \sqrt 2

Show Answer
Answer: ((a))

−3+2 - \sqrt 3 + \sqrt 2

56

What is the least number which when doubled is perfectly divisible by 7, 12 and 15? 

  1. ((a))

    420

  2. ((b))

    210

  3. ((c))

    214

  4. ((d))

    220

Show Answer
Answer: ((a))

420

57

A sum of Rs. 10,000 amounts to Rs. 11, 449 in 2 years, when the interest is compounded annually. The interest rate percent per annum is:

  1. ((a))

    6%

  2. ((b))

    1%

  3. ((c))

    7%

  4. ((d))

    8%

Show Answer
Answer: ((a))

6%

58

The ages of X and Y are in the ratio 4 : 7. Three years earlier, the ratio of their ages was 1 : 2. What is the difference between their current ages (Y - X)?

  1. ((a))

    3

  2. ((b))

    6

  3. ((c))

    9

  4. ((d))

    7.5

Show Answer
Answer: ((a))

3

59

What is 80% of 50% of 90?

  1. ((a))

    30

  2. ((b))

    34

  3. ((c))

    32

  4. ((d))

    36

Show Answer
Answer: ((a))

30

60

Choose the figure that is different from the rest.

  1. ((a))

  2. ((b))

  3. ((c))

  4. ((d))

Show Answer
Answer: ((a))

61

A series is given, with one number missing. Choose the correct alternative from the given ones that will complete the series.

1.14, 1.28, 1.42, ?, 1.70, 1.84

  1. ((a))

    1.56

  2. ((b))

    1.54

  3. ((c))

    1.68

  4. ((d))

    1.62

Show Answer
Answer: ((a))

1.56

62

Two planes E and F start flying from the same point. E flies 7 km west, then turns to its left and flies 15 km. Meanwhile F flies 11 km east and turns right and flies 15 km. Where is F with respect to E?

  1. ((a))

    F is 18 km west of E

  2. ((b))

    F is 4 km east of E

  3. ((c))

    F is 18 km east of E

  4. ((d))

    F is 4 km west of E

Show Answer
Answer: ((a))

F is 18 km west of E

63

Given below are some letters, that each of these letters has a corresponding number. Select the combination of numbers from the option so that the jumbled letters arranged accordingly will form a meaningful English word.

H T R U O A

1 2 3 4 5 6

  1. ((a))

    6, 4, 2, 1, 5, 3

  2. ((b))

    3, 4, 5, 2, 1, 6

  3. ((c))

    1, 6, 2, 4, 5, 3

  4. ((d))

    2, 1, 5, 3, 4, 6

Show Answer
Answer: ((a))

6, 4, 2, 1, 5, 3

64

I, J, K and L are sitting in a row. L and I are sitting next to each other and I and K are the ends. Who is sitting next to J?

  1. ((a))

    Only K 

  2. ((b))

    L and I

  3. ((c))

    K and L

  4. ((d))

    Only L

Show Answer
Answer: ((a))

Only K 

65

Select the option that is related to the third term in the same way as the second term is related to the first term.

Tall : Short ∷ Glad : ?

  1. ((a))

    Sad

  2. ((b))

    Happy

  3. ((c))

    Emotion

  4. ((d))

    Smile

Show Answer
Answer: ((a))

Sad

66

If, ‘+’ represents ‘×’, ‘-‘ represents ‘+’, ‘×’ represents ‘÷’ and ‘÷’ represents ‘-‘ then find the value of the following expression.

9 × 3 + 6 ÷ 2 = ?

  1. ((a))

    20

  2. ((b))

    10

  3. ((c))

    12

  4. ((d))

    16

Show Answer
Answer: ((a))

20

67

If G + H means G is daughter of H, G- H means G is sister H and G * H means G is husband of H, which of the following shows that I is the daughter of H?

  1. ((a))

    I – J + F * H

  2. ((b))

    I + J - F * H

  3. ((c))

    I – J * F + H

  4. ((d))

    I * J - F + H

Show Answer
Answer: ((a))

I – J + F * H

68

Which of the following Venn diagrams best represents the relationship between Indians, doctors and women?

  1. ((a))

  2. ((b))

  3. ((c))

  4. ((d))

Show Answer
Answer: ((a))

69

Given below are two statement, followed by two conclusion, I and II. You have to consider the statement to be true even if they seem to be at variance from commonly known facts. You have to decide which of the given conclusions, if any, follow(s) from the given statements.

Statement 1: No quadrilaterals are polygons.

Statement 2: All polygons are rhombuses.

Conclusion I: Some rhombuses are quadrilaterals.

Conclusion II: Some rhombuses are polygons.

  1. ((a))

    Neither I nor II follows

  2. ((b))

    Only conclusion II follows

  3. ((c))

    Only conclusion I follows

  4. ((d))

    Both I and II follow

Show Answer
Answer: ((a))

Neither I nor II follows

70

Which two signs should be interchanged to make the given equation correct?

9 ÷ 3 + 8 × 2 – 15 = 2

  1. ((a))

    × and -

  2. ((b))

    ÷ and -

  3. ((c))
    • and ×
  4. ((d))
    • and -
Show Answer
Answer: ((a))

× and -

71

What is the minimum number of lines required to make the given image?

  1. ((a))

    13

  2. ((b))

    12

  3. ((c))

    10

  4. ((d))

    9

Show Answer
Answer: ((a))

13

72

A series is give, with one term missing. Choose the correct alternative from the given ones that will complete the series.

OOOOOX, OOOOXX, OOOXXX, OOXXXX, ?

  1. ((a))

    XXXXXX

  2. ((b))

    OOXXXXX

  3. ((c))

    OOXXXX

  4. ((d))

    OXXXXX

Show Answer
Answer: ((a))

XXXXXX

73

If C $ D means C is daughter of D, C & D means C is mother of D and C % D means C is son of D, then what does W $ X & Y % Z mean?

  1. ((a))

    Z is wife of W

  2. ((b))

    Z is mother of W

  3. ((c))

    Z is father of W

  4. ((d))

    Z is daughter of W

Show Answer
Answer: ((a))

Z is wife of W

74

Given below is a question, followed by two arguments, I and II. You have to decide which of the given arguments, if any, is a strong argument, with respect to the question.

Question: Should advertisements be banned on television?

Argument I: Yes, advertisements are immoral.

Argument II: No, advertisements bring in revenue which helps reduce cost for viewers.

  1. ((a))

    Only argument II is strong.

  2. ((b))

    Only argument I is strong.

  3. ((c))

    Neither I nor II is strong.

  4. ((d))

    Both I and II are strong.

Show Answer
Answer: ((a))

Only argument II is strong.

75

Select the option that is related to the third number in the same way as the second number is related to the first number.

-9/11 : 11/9 ∷ 13/2 : ?

  1. ((a))

    3/7

  2. ((b))

    2/13

  3. ((c))

    -2/13

  4. ((d))

    -7/3

Show Answer
Answer: ((a))

3/7

76

Given below is a statement followed by two assumption numbered I and II. You have to decide which of the assumptions is/are implicit in the statement.

Statement: The human body produces Vitamin D when exposed to sunlight.

Assumption I: The human body will have Vitamin D even if it is not consumed via food.

Assumption II: A large portion of the global population suffers from Vitamin D deficiency.

  1. ((a))

    Both I and II are implicit

  2. ((b))

    Only assumption II is implicit

  3. ((c))

    Neither I nor II is implicit

  4. ((d))

    Only assumption I is implicit

Show Answer
Answer: ((a))

Both I and II are implicit

77

A salesperson starts from his office and drives 2 km east, then turns north and drives 7 km, then turns to his right and drives 6 km, then turns south and drives 7 km. Where is he now with respect to his starting position?

  1. ((a))

    8 km east

  2. ((b))

    4 km west

  3. ((c))

    4 km east

  4. ((d))

    8 km west

Show Answer
Answer: ((a))

8 km east

78

Unscramble the letters in the words given below and find the odd word out.

  1. ((a))

    FLOW

  2. ((b))

    ILNO

  3. ((c))

    ERTIG

  4. ((d))

    WCO

Show Answer
Answer: ((a))

FLOW

79

Find the odd group of letters from the given alternatives.

  1. ((a))

    EFG

  2. ((b))

    PQR

  3. ((c))

    VWX

  4. ((d))

    HJL

Show Answer
Answer: ((a))

EFG

80

Choose the figure that is different from the rest.

  1. ((a))

  2. ((b))

  3. ((c))

  4. ((d))

Show Answer
Answer: ((a))

81

In a code language, 295 means ‘water is liquid’, 549 means ‘oil is liquid’ and 824 means ‘oil on water.’ Find the code for ‘on’.

  1. ((a))

    4

  2. ((b))

    2

  3. ((c))

    8

  4. ((d))

    5

Show Answer
Answer: ((a))

4

82

In the following figure, square represents Chinese, triangle represents dancers, circle represents male and rectangle represents architects. Which set of letters represents dancers who are male?

  1. ((a))

    DEIG

  2. ((b))

    DEF

  3. ((c))

    IGH

  4. ((d))

    GEF

Show Answer
Answer: ((a))

DEIG

83

The abbreviation AC in an engineering drawing stands for __________.

  1. ((a))

    Across Corners

  2. ((b))

    Aerial Cut

  3. ((c))

    Attached Circle

  4. ((d))

    Air Conditioning

Show Answer
Answer: ((a))

Across Corners

84

Greater the value of _______ of a material, the more rapidly it will conduct heat. 

  1. ((a))

    melting point

  2. ((b))

    latent heat

  3. ((c))

    regelation

  4. ((d))

    thermal conductivity

Show Answer
Answer: ((a))

melting point

85

The effort applied to move a load is 15 units and the mechanical advantage is observed to be 3. Find the load. 

  1. ((a))

    5 units

  2. ((b))

    3 units

  3. ((c))

    15 units

  4. ((d))

    45 units

Show Answer
Answer: ((a))

5 units

86

What is the unit's digit in 366 × 641 × 753 

  1. ((a))

    8

  2. ((b))

    3

  3. ((c))

    6

  4. ((d))

    7

Show Answer
Answer: ((a))

8

87

If the width of a standard engineering drawing sheet is 841 mm, then its length would be ________ mm. 

  1. ((a))

    1189

  2. ((b))

    1250

  3. ((c))

    1000

  4. ((d))

    1216

Show Answer
Answer: ((a))

1189

88

A 200 g block of iron was heated from 30°C to 60°C. How much heat was transferred to the block (specific heat of iron is 450 Jkg-1K-1)?

  1. ((a))

    6000 J

  2. ((b))

    27 J

  3. ((c))

    2700 J

  4. ((d))

    270 J

Show Answer
Answer: ((a))

6000 J

89

If a machine overcomes a load 'L' and the distance travelled by the load is 'Ld', the work done by the load will be __________.

  1. ((a))

    L × Ld

  2. ((b))

    LLd\rm \frac{L}{Ld}

  3. ((c))

    LdL\rm \frac{Ld}{L}

  4. ((d))

    1L×Ld\rm \frac{1}{L \times Ld}

Show Answer
Answer: ((a))

L × Ld

90

A brass rod (thermal conductivity 109 J/s m K) has an area of cross section 0.04 m2 and length 20 cm. If the two end of the rod are maintained at a temperature difference of 200°C, the rate of heat flow through the rod is ________.

  1. ((a))

    3.42 kJ/s

  2. ((b))

    2.32 kJ/s

  3. ((c))

    4.36 kJ/s

  4. ((d))

    5.80 kJ/s

Show Answer
Answer: ((a))

3.42 kJ/s

91

The effort in a class 1 lever is in __________ direction(s).

  1. ((a))

    three

  2. ((b))

    multiple

  3. ((c))

    two

  4. ((d))

    one

Show Answer
Answer: ((a))

three

92

The velocity ratio of a simple machine is the ratio of distance traveled by the ________ to the distance traveled by the ________ in the machine.

  1. ((a))

    load; load

  2. ((b))

    effort; load

  3. ((c))

    load; effort

  4. ((d))

    effort; effort

Show Answer
Answer: ((a))

load; load

93

If straight lines are drawn from various points on the contour of an object to meet a plane, the figure obtained on the plane is called the _______ of the object. 

  1. ((a))

    development

  2. ((b))

    dimensioning

  3. ((c))

    projection

  4. ((d))

    animation

Show Answer
Answer: ((a))

development

94

A _______ is a theoretical exact plane, axis or point location that GD & T or dimensional tolerances are referenced to. 

  1. ((a))

    flange

  2. ((b))

    frame

  3. ((c))

    section

  4. ((d))

    datum

Show Answer
Answer: ((a))

flange

95

Molar specific heat capacity of a substance is _________.

  1. ((a))

    (1μ)(ΔQΔT)\left(\frac{1}{\mu}\right)\left( \frac{\Delta Q}{\Delta T} \right)

  2. ((b))

    μ(ΔQΔT)\mu \left( \frac{\Delta Q}{\Delta T} \right)

  3. ((c))

    (1μ)(ΔTΔQ)\left(\frac{1}{\mu}\right)\left( \frac{\Delta T}{\Delta Q} \right)

  4. ((d))

    μ(ΔTΔQ)\mu \left( \frac{\Delta T}{\Delta Q} \right)

Show Answer
Answer: ((a))

(1μ)(ΔQΔT)\left(\frac{1}{\mu}\right)\left( \frac{\Delta Q}{\Delta T} \right)

96

In engineering drawing, the letters LH signifies __________.

  1. ((a))

    Level Hide

  2. ((b))

    Left Hand

  3. ((c))

    Low Heat

  4. ((d))

    Limit of Height

Show Answer
Answer: ((a))

Level Hide

97

Identify the material having high coefficient of volume expansion. 

  1. ((a))

    Brass

  2. ((b))

    Alcohol

  3. ((c))

    Glass

  4. ((d))

    Water

Show Answer
Answer: ((a))

Brass

98

An object starts from rest at x = 0 m and moves with a constant acceleration of 1.6 m/s2 along the x-axis. During its journey from x = 12.8 m to x = 20.0 m, its average velocity will be __________.

  1. ((a))

    7.2 m/s

  2. ((b))

    3.6 m/s

  3. ((c))

    8.8 m/s

  4. ((d))

    2.4 m/s

Show Answer
Answer: ((a))

7.2 m/s

99

You are given a question and two statements. Identify which of the statements is/are necessary/sufficient to answer the question.

Question: What was the discount percent offered on the soap by the store?

Statements:

I) The store is giving 1 soap free on purchase of three.

II) Rs. 10 discount is offered on purchase of soap worth 36.

  1. ((a))

    II alone is sufficient while I alone is not sufficient

  2. ((b))

    I alone is sufficient while II alone is not sufficient

  3. ((c))

    Neither I nor II is sufficient

  4. ((d))

    Either I or II is sufficient

Show Answer
Answer: ((a))

II alone is sufficient while I alone is not sufficient

100

Identify the material having low coefficient of volume expansion 

  1. ((a))

    Iron

  2. ((b))

    Mercury

  3. ((c))

    Brass

  4. ((d))

    Aluminium

Show Answer
Answer: ((a))

Iron

Part B (75 questions)

101

SAE stands for __________.

  1. ((a))

    Society of American Engineer

  2. ((b))

    Society of Atomic Energy

  3. ((c))

    Society of Automobile Industry

  4. ((d))

    Society of Automobile Engineer

Show Answer
Answer: ((a))

Society of American Engineer

102

The meaning of calibration of injection pump is that what a plunger supply in full quantity to cylinders. Choose the best option among the following. 

  1. ((a))

    Power

  2. ((b))

    Fuel

  3. ((c))

    Compression

  4. ((d))

    Pressure

Show Answer
Answer: ((a))

Power

103

A pressure relief valve is fitted in between a/an ___________.

  1. ((a))

    oil pump and filter

  2. ((b))

    oil strainer and filter

  3. ((c))

    oil strainer and oil pump

  4. ((d))

    main oil gallery and filter

Show Answer
Answer: ((a))

oil pump and filter

104

Pre-combustion chambers are used in which of the following? 

  1. ((a))

    Direct injection (DI) engines

  2. ((b))

    Indirect injection (IDI) engines

  3. ((c))

    Multi-point fuel injection (MPFI) engines

  4. ((d))

    Common rail direct injection (CRDi) engines

Show Answer
Answer: ((a))

Direct injection (DI) engines

105

Generally the piston rings are made of __________.

  1. ((a))

    cast iron

  2. ((b))

    wrought iron

  3. ((c))

    high carbon steel

  4. ((d))

    medium carbon steel

Show Answer
Answer: ((a))

cast iron

106

Which filtering material is used in a secondary fuel filter? 

  1. ((a))

    Plastic

  2. ((b))

    Felt

  3. ((c))

    Cloth

  4. ((d))

    Paper

Show Answer
Answer: ((a))

Plastic

107

Which type of regulator is used in an alternator? 

  1. ((a))

    Cut out regulator

  2. ((b))

    Sealed regulator

  3. ((c))

    Open type

  4. ((d))

    Charging regulator

Show Answer
Answer: ((a))

Cut out regulator

108

A secondary filter of a diesel fuel system is made by which material? 

  1. ((a))

    Cotton

  2. ((b))

    Brass

  3. ((c))

    Paper

  4. ((d))

    Bronze 

Show Answer
Answer: ((a))

Cotton

109

A turbo charger is driven by whom?  

  1. ((a))

    Crank pulley

  2. ((b))

    Exhaust gas pressure

  3. ((c))

    Cam shaft

  4. ((d))

    Gear box

Show Answer
Answer: ((a))

Crank pulley

110

A wet type air cleaner is also known as a/an __________.

  1. ((a))

    oil bath air cleaner

  2. ((b))

    paper type air cleaner

  3. ((c))

    cloth type air cleaner

  4. ((d))

    dry type air cleaner

Show Answer
Answer: ((a))

oil bath air cleaner

111

Allen key is also known as a/an ___________.

  1. ((a))

    hollow set screw wrench

  2. ((b))

    open end wrench

  3. ((c))

    pipe wrench

  4. ((d))

    adjustable wrench

Show Answer
Answer: ((a))

hollow set screw wrench

112

A four-stroke cycle engine produces one power stroke in ____________.

  1. ((a))

    four revolutions of a crankshaft

  2. ((b))

    two revolutions of a crankshaft

  3. ((c))

    three revolutions of a crankshaft

  4. ((d))

    one revolution of a crankshaft

Show Answer
Answer: ((a))

four revolutions of a crankshaft

113

Valve spring tension test is conducted by which equipment? 

  1. ((a))

    Spring tension tester

  2. ((b))

    Scale

  3. ((c))

    Hydraulic press

  4. ((d))

    Torque wrench

Show Answer
Answer: ((a))

Spring tension tester

114

The exhaust manifold is connected to the cylinder head of an engine by ________.

  1. ((a))

    a cork sheet gasket

  2. ((b))

    a copper gasket

  3. ((c))

    a fibre gasket

  4. ((d))

    an asbestos gasket

Show Answer
Answer: ((a))

a cork sheet gasket

115

Connecting rod is made of which material? 

  1. ((a))

    Aluminium

  2. ((b))

    Cast iron

  3. ((c))

    Iron

  4. ((d))

    Forged steel

Show Answer
Answer: ((a))

Aluminium

116

The material of an inlet valve is __________.

  1. ((a))

    chrome vanadium steel

  2. ((b))

    silicon chrome alloy

  3. ((c))

    stainless steel

  4. ((d))

    nickel chromium alloy steel

Show Answer
Answer: ((a))

chrome vanadium steel

117

What that period is called in which both, the exhaust valve and the inlet valve remain open? 

  1. ((a))

    Open lap

  2. ((b))

    Over lap

  3. ((c))

    Closed lap

  4. ((d))

    Over sap

Show Answer
Answer: ((a))

Open lap

118

The simplest type of a seam is a  ___________.

  1. ((a))

    double seam

  2. ((b))

    double groove seam

  3. ((c))

    groove seam

  4. ((d))

    lap seam

Show Answer
Answer: ((a))

double seam

119

In an alternator, which part converts AC to DC supply? 

  1. ((a))

    Commutator

  2. ((b))

    Pole shoe

  3. ((c))

    Diode rectifier

  4. ((d))

    Carbon brush

Show Answer
Answer: ((a))

Commutator

120

The firing order of a four-cylinder engine is ____________.

  1. ((a))

    1 - 3 - 2 - 4

  2. ((b))

    1 - 3 - 4 - 2

  3. ((c))

    1 - 2 - 3 - 4

  4. ((d))

    1 - 4 - 2 - 3

Show Answer
Answer: ((a))

1 - 3 - 2 - 4

121

Clutch is a part of: 

  1. ((a))

    the lubrication system

  2. ((b))

    the transmission system

  3. ((c))

    the exhaust system

  4. ((d))

    the suspension system

Show Answer
Answer: ((a))

the lubrication system

122

Which type of thermostat is most commonly used in modern automobiles? 

  1. ((a))

    Bellow type

  2. ((b))

    Bi-metal type

  3. ((c))

    Wax type

  4. ((d))

    Plunger type

Show Answer
Answer: ((a))

Bellow type

123

Opening and closing of valves in relation to piston movement is called ________.

  1. ((a))

    valve relacing

  2. ((b))

    valve grinding

  3. ((c))

    valve lapping

  4. ((d))

    valve timing

Show Answer
Answer: ((a))

valve relacing

124

What is the full form of CRDI? 

  1. ((a))

    Common Rail Duo Injection

  2. ((b))

    Common Rail Direct Injection

  3. ((c))

    Common Rail Dual Injection

  4. ((d))

    Common Rail Digital Injection

Show Answer
Answer: ((a))

Common Rail Duo Injection

125

In a turbocharger, the turbine wheel housing is connected to: 

  1. ((a))

    the flywheel side

  2. ((b))

    the front of the engine block

  3. ((c))

    the intake manifold

  4. ((d))

    the exhaust manifold

Show Answer
Answer: ((a))

the flywheel side

126

The two screws fitted over the fuel filter are called _________.

  1. ((a))

    knurling screws

  2. ((b))

    bleeding screws

  3. ((c))

    cutting screws

  4. ((d))

    feeding screws

Show Answer
Answer: ((a))

knurling screws

127

How a turbine is rotated in a turbo-charger?  

  1. ((a))

    By Exit gases from muffler

  2. ((b))

    By Exit gases from tail pipe

  3. ((c))

    By exhaust gas of exhaust manifold

  4. ((d))

    By gases from catalytic converter

Show Answer
Answer: ((a))

By Exit gases from muffler

128

What is the task of an EGR valve? 

  1. ((a))

    To reduce HC

  2. ((b))

    To reduce NOx

  3. ((c))

    To reduce CO2

  4. ((d))

    To reduce N2

Show Answer
Answer: ((a))

To reduce HC

129

The ratio of total volume of cylinder to its clearance volume is known as _________.

  1. ((a))

    compression ratio

  2. ((b))

    clearance volume

  3. ((c))

    swept volume

  4. ((d))

    compression pressure

Show Answer
Answer: ((a))

compression ratio

130

Inline engines give better balancing and more uniform ___________.

  1. ((a))

    torque

  2. ((b))

    efficiency

  3. ((c))

    energy

  4. ((d))

    speed

Show Answer
Answer: ((a))

torque

131

Which type of oil pump is used in stationary diesel engines? 

  1. ((a))

    Rotary type

  2. ((b))

    Plunger type

  3. ((c))

    Vane type

  4. ((d))

    Gear type

Show Answer
Answer: ((a))

Rotary type

132

In which type of a lubrication system, oil pump lifts the oil from a sump and passes it into a filter and then into the main gallery? 

  1. ((a))

    Petrol mix lubrication

  2. ((b))

    Full flow

  3. ((c))

    Bypass

  4. ((d))

    Gravity feed lubrication

Show Answer
Answer: ((a))

Petrol mix lubrication

133

Ring expander tool is used for fitting a __________.

  1. ((a))

    piston ring

  2. ((b))

    connecting rod

  3. ((c))

    crankshaft

  4. ((d))

    piston

Show Answer
Answer: ((a))

piston ring

134

How are exhaust gases emitted out of the oil sump in diesel engines? 

  1. ((a))

    Through the oil cooler

  2. ((b))

    Through the oil filter

  3. ((c))

    Through the air cleaner

  4. ((d))

    Through the breather pipe

Show Answer
Answer: ((a))

Through the oil cooler

135

On which angle a valve is generally placed on head? 

  1. ((a))

    30°

  2. ((b))

    45°

  3. ((c))

    15°

  4. ((d))

    90°

Show Answer
Answer: ((a))

30°

136

In the common rail direct injection system, the injectors are opened and closed by: 

  1. ((a))

    a reed valve

  2. ((b))

    a CB point

  3. ((c))

    a poppet valve

  4. ((d))

    a solenoid valve

Show Answer
Answer: ((a))

a reed valve

137

The time before which the valve opens is called __________

  1. ((a))

    Lapping

  2. ((b))

    Valve lead

  3. ((c))

    Over lap

  4. ((d))

    Valve gap

Show Answer
Answer: ((a))

Lapping

138

A valve seat is ground by which equipment? 

  1. ((a))

    Surface grinder

  2. ((b))

    Portable grinder

  3. ((c))

    Grinder

  4. ((d))

    Special type of valve seat refacer

Show Answer
Answer: ((a))

Surface grinder

139

The distance between the centre line of front & rear wheels from side view is _________.

  1. ((a))

    Wheel base

  2. ((b))

    Rear overhung

  3. ((c))

    Wheel track

  4. ((d))

    Front Overhung

Show Answer
Answer: ((a))

Wheel base

140

When a piston is at BDC, the clearance between cylinder head to piston head is known as _________

  1. ((a))

    clearance volume

  2. ((b))

    piston displacement

  3. ((c))

    swept volume

  4. ((d))

    total volume

Show Answer
Answer: ((a))

clearance volume

141

When a valve stays open late it is known as ________.

  1. ((a))

    valve overlap

  2. ((b))

    valve lag

  3. ((c))

    valve lead

  4. ((d))

    valve duration

Show Answer
Answer: ((a))

valve overlap

142

A _______ is used to check the specific gravity of a battery. 

  1. ((a))

    voltmeter

  2. ((b))

    multimeter

  3. ((c))

    hydrometer

  4. ((d))

    cell tester

Show Answer
Answer: ((a))

voltmeter

143

In a water cooling system the thermostat opens at _______

  1. ((a))

    100° C

  2. ((b))

    90° C

  3. ((c))

    85° C

  4. ((d))

    91° C

Show Answer
Answer: ((a))

100° C

144

For cleaning the dirt on a welding bead, which tool is used? 

  1. ((a))

    Chipping hammer

  2. ((b))

    Brush

  3. ((c))

    Painting brush

  4. ((d))

    Hammer

Show Answer
Answer: ((a))

Chipping hammer

145

What is the name of the middle part of a connecting rod which connects the head and the big end? 

  1. ((a))

    Neck

  2. ((b))

    Shank

  3. ((c))

    Tank

  4. ((d))

    Mack

Show Answer
Answer: ((a))

Neck

146

Which engine has a maximum fuel efficiency? 

  1. ((a))

    Radial engine

  2. ((b))

    Inline engine

  3. ((c))

    'V' engine

  4. ((d))

    Opposed engine

Show Answer
Answer: ((a))

Radial engine

147

Which type of starting system needs compressed air? 

  1. ((a))

    Air starting method

  2. ((b))

    Manual starting method

  3. ((c))

    Gasoline engine starting method

  4. ((d))

    Electric starting method

Show Answer
Answer: ((a))

Air starting method

148

A cylinder block manufactured in a single piece is called a ___________.

  1. ((a))

    Inverted Cylinder

  2. ((b))

    Try cylinder

  3. ((c))

    Monoblock cylinder

  4. ((d))

    Flat Cylinder

Show Answer
Answer: ((a))

Inverted Cylinder

149

Which tool should be used for fitting a ring in a piston? 

  1. ((a))

    Ring expander tool

  2. ((b))

    Pipe wrench

  3. ((c))

    Ring screwdriver

  4. ((d))

    Plier

Show Answer
Answer: ((a))

Ring expander tool

150

A cylinder block of a two wheeler engine is generally made up of which metal? 

  1. ((a))

    Cast iron

  2. ((b))

    Copper

  3. ((c))

    Aluminium

  4. ((d))

    Iron

Show Answer
Answer: ((a))

Cast iron

151

Where is a thermostat valve connected in a pressured water cooling system? 

  1. ((a))

    Water jacket

  2. ((b))

    Water outlet elbow

  3. ((c))

    Water pump inlet

  4. ((d))

    Below the radiator

Show Answer
Answer: ((a))

Water jacket

152

Where is the temperature gauge located in a vehicle, which indicates the temperature of the engine's coolant or water? 

  1. ((a))

    Steering

  2. ((b))

    Radiator

  3. ((c))

    Engine

  4. ((d))

    Dashboard

Show Answer
Answer: ((a))

Steering

153

In a diesel engine during the exhaust stroke, what is emitted out of the tail pipe? 

  1. ((a))

    NOx

  2. ((b))

    CO2

  3. ((c))

    CO

  4. ((d))

    N2

Show Answer
Answer: ((a))

NOx

154

The small hole present on the body of a pintaux nozzle is called: 

  1. ((a))

    the main hole

  2. ((b))

    the sub-hole

  3. ((c))

    the auxiliary hole

  4. ((d))

    the vibrated hole

Show Answer
Answer: ((a))

the main hole

155

In which of the following circuits, a solenoid switch is used? 

  1. ((a))

    Charging circuit

  2. ((b))

    Electrical circuit

  3. ((c))

    Starting circuit

  4. ((d))

    Ignition circuit

Show Answer
Answer: ((a))

Charging circuit

156

Quantity of fuel and its timing is controlled by ___________.

  1. ((a))

    Feed Pump

  2. ((b))

    Oil pump

  3. ((c))

    Fuel Injection Pump

  4. ((d))

    AC mechanical fuel pump

Show Answer
Answer: ((a))

Feed Pump

157

Compression ratio of a diesel engine is _______

  1. ((a))

    24 ∶ 1 to 30 ∶ 1

  2. ((b))

    15 ∶ 1 to 19 ∶ 1

  3. ((c))

    10 ∶ 1 to 12 ∶ 1

  4. ((d))

    16 ∶ 1 to 24 ∶ 1

Show Answer
Answer: ((a))

24 ∶ 1 to 30 ∶ 1

158

Which of the following is NOT a property of a lubricant? 

  1. ((a))

    Ash point

  2. ((b))

    Flash point

  3. ((c))

    Pour point

  4. ((d))

    Fire point

Show Answer
Answer: ((a))

Ash point

159

Which type of fuel feed pump is used in conventional inline fuel injection pumps? 

  1. ((a))

    Gear type

  2. ((b))

    Plunger type

  3. ((c))

    Vane type

  4. ((d))

    Electrical type

Show Answer
Answer: ((a))

Gear type

160

Which metal is a radiator generally made up of ?

  1. ((a))

    Steel

  2. ((b))

    Copper

  3. ((c))

    Iron

  4. ((d))

    Cast iron

Show Answer
Answer: ((a))

Steel

161

A commutator is made of which of the following? 

  1. ((a))

    Aluminium segments

  2. ((b))

    Iron segments

  3. ((c))

    Brass segments

  4. ((d))

    Copper segments

Show Answer
Answer: ((a))

Aluminium segments

162

The portion which joins a main journal and a crankpin is called the ________.

  1. ((a))

    web

  2. ((b))

    balance weight

  3. ((c))

    throw

  4. ((d))

    crank Journal

Show Answer
Answer: ((a))

web

163

Compression ratio of a petrol engine is _______

  1. ((a))

    30 ∶ 1

  2. ((b))

    24 ∶ 1

  3. ((c))

    78 ∶ 1

  4. ((d))

    8 ∶ 1

Show Answer
Answer: ((a))

30 ∶ 1

164

Which part of a sump in an engine indicates the level of the oil? 

  1. ((a))

    Feeler gauge

  2. ((b))

    Plastic gauge

  3. ((c))

    Dip stick

  4. ((d))

    Oil pressure gauge

Show Answer
Answer: ((a))

Feeler gauge

165

How much more power is available in an engine after fitting the turbo super charger? 

  1. ((a))

    50% to 60%

  2. ((b))

    20% to 30%

  3. ((c))

    10% to 15%

  4. ((d))

    25% to 40%

Show Answer
Answer: ((a))

50% to 60%

166

Compression pressure of a diesel engine is _______

  1. ((a))

    200 to 400 PSI

  2. ((b))

    150 to 180 PSI

  3. ((c))

    350 to 450 PSI

  4. ((d))

    450 to 600 PSI

Show Answer
Answer: ((a))

200 to 400 PSI

167

The gap between the inside diameter of an installed bearing and the outside diameter of the crankshaft journal is called ___________.

  1. ((a))

    Valve clearance

  2. ((b))

    Part clearance

  3. ((c))

    Oil clearance

  4. ((d))

    Tappet clearance

Show Answer
Answer: ((a))

Valve clearance

168

Valve clearance is also called as _________.

  1. ((a))

    tappet lifting

  2. ((b))

    valve lifter

  3. ((c))

    tappet

  4. ((d))

    tappet clearance

Show Answer
Answer: ((a))

tappet lifting

169

During the compression stroke in four-stroke cycle engine _________.

  1. ((a))

    both the valves close

  2. ((b))

    inlet opens, exhaust closes

  3. ((c))

    both the valves open

  4. ((d))

    exhaust opens and inlet closes

Show Answer
Answer: ((a))

both the valves close

170

How many compression rings are fitted in a piston for proper functioning of a compression stroke?

  1. ((a))

    6

  2. ((b))

    2

  3. ((c))

    4

  4. ((d))

    8

Show Answer
Answer: ((a))

6

171

Main function of a lubricant is to _________.

  1. ((a))

    maintain wetness between two moving parts.

  2. ((b))

    To improve the aesthetic look of the parts

  3. ((c))

    To increase the hardness of the parts with which it is in contact

  4. ((d))

    minimise the friction between two moving parts.

Show Answer
Answer: ((a))

maintain wetness between two moving parts.

172

The brake horse power of an engine is measured by which equipment? 

  1. ((a))

    Dynamometer

  2. ((b))

    Multimeter

  3. ((c))

    Voltmeter

  4. ((d))

    Ammeter

Show Answer
Answer: ((a))

Dynamometer

173

The distance travelled by a piston from TDC to BDC is called __________.

  1. ((a))

    cubic capacity

  2. ((b))

    clearance volume

  3. ((c))

    swept volume

  4. ((d))

    stroke

Show Answer
Answer: ((a))

cubic capacity

174

Galvanized iron sheet is also called as a _________.

  1. ((a))

    black iron sheet

  2. ((b))

    tin sheet

  3. ((c))

    brass sheet

  4. ((d))

    GI sheet

Show Answer
Answer: ((a))

black iron sheet

175

The roller of a feed pump is operated by a/an __________.

  1. ((a))

    crank pin

  2. ((b))

    crankshaft

  3. ((c))

    camshaft

  4. ((d))

    eccentric cam of an FIP camshaft

Show Answer
Answer: ((a))

crank pin

Attempt this paper under real exam conditions

Timed interface, section switching, instant scoring, and question-by-question analytics — free.

Start Timed Attempt